Instructions/Assembly Guide

e-Bikes Maintenance:

GENERAL:

The vehicle should be checked for damage, missing or badly worn parts before

each use. If any part of the product does not operate properly – discontinue use.

• Check the tightness of the fasteners before each use. Replace any fasteners that are damaged.

• Inspect the product frequently. Failure to inspect the product and to make repairs or adjust-

ments, as necessary, can result in injury to the rider or to others. Make sure all parts are cor-

rectly assembled and adjusted as written in this manual and any “Special Instructions.”

• Immediately replace any damaged, missing, or badly worn parts.

• Make sure all fasteners are correctly tightened as written in this manual and any “Special In-

structions.” Parts that are not tight enough can be lost or operate poorly. Over tightened parts

can be damaged. Make sure any replacement fasteners are the correct size and type.

• Check the tightness of the wheels.

• Keep the product clean and free of dirt, dust and water. This will prolong the useful life of the

product.

• Always remove the battery when replacing a component or performing maintenance.

• Periodically check your e-Bike’s wiring and motor condition and mounting.

• Always store your e-Bike indoors. Bike’s left outside in weather can deteriorate very quickly.

Store your e-Bike in a clean dry environment. Do not cover with plastic which will hold mois-

ture inside and a ect your bike’s electrical system.

• Store your battery indoors during cold weather to optimize battery performance.

CAUTION: Self-locking nuts and other self-locking devices may lose their e ectiveness

when re-used.

CLEANING:

Do not submerge the drive unit in water or wash with a pressurized hose. Keep

all components clean, especially the battery pack contact points. Clean carefully with soft, damp

cloth using only mild soap and water.

STORAGE: Always store the battery pack in a cool dry place.

Keep it away from sources of

heat, such as stoves and heaters.

During periods of prolonged storage, battery pack should be

charged at leased once every 6 months at a minimum of 60% or every 3 months at 40%. Do

not charge higher than 60% when storing.

NOTE: If the instructions in this manual or any “Special Instructions” are not su cient for

you, please contact customer service.

Maintenance