User's Manual

ManualsBrandsHuges Hi-Tech ManualsAudio EquipmentBluetooth Headset

Table Of Contents

FCC Statement

Bluetooth headset user guide

Bluetooth headset features

1) Talk Key, Volume up and Power -

To accept/end call; Volume up of the headset. Turn power ON or OFF of the headset.

2) Talk key & Volume down -

To accept/end call; Volume down of the headset.

3) Microphone -

Voice input for outgoing audio.

4) LED indication -

Light indication of the headset status.

5) Ear hook -

Wear the headset on ear.

6) Ear hook –socket - (Back of the headset)

Socket to connect the ear hook to headset

7) Speaker – (Back of the headset)

Listen for incoming audio.

8) Charging port – (Back of the headset)

Plug for charging the battery.

Introduction

This bluetooth headset is a light weight wireless system utilizing bluetooth wireless technology. The headset

contains a microphone and a speaker; it’s for hands free communications with mobile phones. The power is

provided by integral rechargeable battery.

Any device that you want to use with this Bluetooth headset must be compatible with Bluetooth technology

version 1.1 and support the product and make sure that you:

1. Fully charge headset at least 12 hours before you use it the first time.

2. Pair the headset with your Bluetooth phone or other devices before you start making calls.

Note: When you open the packing, you’ll notice the ear hook (inside with battery) is separate from the main

headset, it’s for battery power saving concern.

What's in the package?

1. One bluetooth headset. 2. One adaptor

3. One user guide 4. One hanging string

Choose right or left ear wearing style

Headset can be worn on either ear by adjust the ear hook.

Note: The ear hook can plug into the socket by either side of the headset. Please see below.

Summary of content (6 pages)

PAGE 1
Bluetooth headset user guide Bluetooth headset features 6 2 3 5 1 7 7 8 1) Talk Key, Volume up and Power To accept/end call; Volume up of the headset. Turn power ON or OFF of the headset. 2) Talk key & Volume down To accept/end call; Volume down of the headset. 3) Microphone Voice input for outgoing audio. 4) LED indication Light indication of the headset status. 5) Ear hook Wear the headset on ear.
PAGE 2
Adjustable hook’s angle for your ear You can use the adjustable hook to wear it more comfortable to your ear. Please see below. Important: Please be careful when you are adjusting the hook’s angle. Do not force it too much which to avoid it getting any damages happened. Prepare to use your Bluetooth headset 1. Charging and battery time Before use your headset, you need to fully charge the battery. NOTE: When the headset is under charging, it stays on “OFF” mode.
PAGE 3
E. The phone's display will advise that it has found HH304 and ask you to confirm that you want to pair with it. Confirm this. F. Enter the passkey 1234, when your phone menu prompts you, and the phone will start to pair the headset. G. Your phone screen will advise that pairing has been successful, and the blue LED on your headset will change state, it will flash once every 3 sec. when Bluetooth pairing has been established.
PAGE 4
Speaker volume control button Headset offers adjust of speaker volume by press the volume up or down button. Volume up and volume down button will regulate the volume to the speaker. One step per key press increases / decreases the desired volume until a satisfactory level is reached. An audible tone is played for each step +/- and when either the minimum or maximum volume has been achieved. Low battery warning The headset needs re-charging when the blue LED is quick flash 6 times every 3 sec.
PAGE 5
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Important information on safe and efficient operation. Read this information before using your phone. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC rules.
PAGE 6
To comply with FCC RF exposure requirement, this device and its antenna must be co-located or operating in the conjunction with any other antenna or transmitter.