User's Manual

ManualsBrandsHuges Hi-Tech ManualsAudio EquipmentBluetooth Headset

Table Of Contents

FCC Statement

Bluetooth headset user guide

Bluetooth headset features

1) Talk/End/Reject and Power -

To accept/end/reject call; turn power ON or OFF of the headset.

2) Microphone -

Voice input for outgoing audio.

3) LED indication -

Light indication of the headset status.

4) Charging port –

Plug for charging the battery.

5) Speaker –

Listen for incoming audio.

6) Internal buzzer -

Sound notification of headset status

Introduction

This bluetooth headset is a light weight wireless system utilizing bluetooth wireless technology. The headset

contains a microphone and a speaker; it’s for hands free communications with mobile phones. The power is

provided by integral rechargeable battery.

Any device that you want to use with this Bluetooth headset must be compatible with Bluetooth technology

version 1.1 and support the product and make sure that you:

1. Fully charge headset at least 12 hours before you use it the first time.

2. Pair the headset with your Bluetooth phone or other devices before you start making calls.

What's in the package?

1. One bluetooth headset. 2. One adaptor

3. One user guide 4. One hanging string

Choose right or left ear wearing style

Headset can be worn on either ear. Just plug in the speaker to your ear.

Prepare to use your Bluetooth headset

1. Charging and battery time

Before use your headset, you need to fully charge the battery.

NOTE: When the headset is under charging, it stays on “OFF” mode. You’ll need to turn “ON” the headset to

use after the charging.

A. Connect the adaptor into an electrical outlet.

B. Plug the adaptor's connector into charging port.

C. While charging, the blue indicator light will stay solid on, when charging is completed, the light will be off.

Summary of content (5 pages)

PAGE 1
Bluetooth headset user guide Bluetooth headset features 3 5 4 2 5 6 1 1) Talk/End/Reject and Power To accept/end/reject call; turn power ON or OFF of the headset. 2) Microphone Voice input for outgoing audio. 3) LED indication Light indication of the headset status. 4) Charging port – Plug for charging the battery. 5) Speaker – Listen for incoming audio.
PAGE 2
Then you can take the adaptor's connector out from the headset and disconnect the adaptor from the electrical outlet. D. Charging time is about 2.5-3 hours. (Note: First time use, please charge at least 12 hours) 2. Linking the headset to the phone (Pairing) Before you use your headset for the first time, you must pair the headset to a Bluetooth phone. The Bluetooth connection between the headset and your phone can be established by setting up a paired link.
PAGE 3
. Press the button once on the headset. 4. A short tone will prompt you and you can speak the voice “tag” name as entered in the phone’s voice dial phone book. 5. The phone automatically dials your selection, and you see the details of the call on the phone screen. 6. When connected, you are free to communicate normally by the headset. NOTE: Make sure the headset and the cell phone are under link stage. For the examples of Ericsson and Nokia cell phones, the and symbols mean "link" status.
PAGE 4
Bluetooth headset specification Compatible bluetooth 1.1 headset profile and handsfree profile Maximum distance 30 Feet (10 meters) Weight of headset 18.5 g Typical standby time 168 hours Typical talk time 5 hours Typical re-charge time 2.5-3 hours Battery type Li-ion rechargeable NOTE: Talk time and standby time are varied according to different mobile phones. Storage of headset 1. Always store the headset and audio gateway safety protected. 2.
PAGE 5
tear, such as microphone, decorative finishes, batteries, and other accessories. * We are not liable for any incidental or consequential damages arising from the use or misuse of any our product. * This warranty gives you specific rights and you may have other rights which vary from area to area. * Unless otherwise instructed in the user guide, the user may not, under any circumstances, attempt to perform service, adjustments or repairs on this unit, whether in or out of warranty.