User's Manual

2. Pairing procedure

Before using your headset, you must pair it with a

Bluetooth

enabled mobile phone and/or audio gateway.

A. Press and hold the Multi-Function Key

(►||) for 3

seconds to turn on the headset.

B. With the headset turned on, press and hold the

Multi-Function Key

(►||) for 6 seconds until the red

and blue LEDs flash alternately, indicating that the

headset is in pairing mode

C. Pairing with a mobile phone: Use your phone’s

menu to

search for

Bluetooth

audio devices. The

phone should indicate that it has found the "HH601"

headset. Select this.

D. Pairing with other audio gateways: Follow the

instructions of the pairing procedure of the audio

devices.

E. When asked for a passkey, enter: “1234”. The audio

device or mobile phone will confirm that pairing has

been successful. If the other device does not have a

user interface, make sure that it takes “1234” as a set

of passkey.