BEDIENUNGSANLEITUNG BASSIUCK 505 2 0 0 W A T T S BASSAMPLIFIER BASSKICK 707 2 5 0 SOUND MATRIX /-i-J GAIN BASS W A T T S MID EQ FIIQUINCY LEVEL TREBLE B A S S A M P L I F I E R MASTER \/.!&..
BASSKICK-MANUAL hlka!k 1 .O CONNECTIONS AND CONTROL FEATURES GAIN: Controls the input sensitivity of the BassKick’s preamp, enabling you to adjust it to match your instrument’s output level. Higher gain settings produce punchy rock sounds. SOUNDMATRIX: Use this rotary pot to dial in diverse basic sounds. SATURATION LED: Indicates the BassKick’s prearnp is being overdriven. For ultra-clean sounds, set the GAIN control so that this LED does not illuminate.
BASSKICK-MANUAL ..,,4=% + 2.0 STANDARD SETUP /CABLE CONNECTIONS Mixing Console FOOTSWITCH FX Devices El I LINE OUT MATRIX ON/OFF t SEND RETURN t1 OUT A Phones BassKick 505 / 707 Sound II: 3.0 OPERATING THE BASSKICK 505/507 3.1 THE SOUNDMATRIX The SOUNDMATRIX is a new type of sound filtering system that lets you dial in diverse basic tonal settings while ensuring the frequency response is always musical. Additionally, it enables you to quickly and comfortably access these basic sounds.
BASSKICK-MANUAL Jhka?!k Activate the SOUNDMATRIX via the front panel switch or an external footswitch. The BassKicks's voicing section also remains active. 3.2 THE INPUT AND VOICING SECTIONS While the SOUNDMATRIX enables you to quickly and effectively select drastically modified sounds, the BassKicks's voicing section is primarily designed to adapt your bass setup to the venue and/or stage as well as the instrument you are using.
BASS-KICK-MANUAL 5.0 POSSIBLE ERROR SOURCES/ TROUBLE-SHOOTING The BassKick is not getting any power: - Check the mains cable to see if it is connected properly. - The mains fuse is defective. Replace the fuse with another identical fuse. If this fuse also blows, consult your Hughes & Kettner dealer. BassKick 707 only: The amp’s output level seems too low. - The overall impedance of the connected cabinets is well above 4 ohms.