User's Manual

1027144–0001 Revision D Index-1
Index
A
Abbreviations (identified), A- 1
Access, buildings and equipment locations, 2–2
Acronyms (identified), A- 1
Adding SSIs, 10–2
Adjusters for antenna azimuth and elevation,
6–6, 7–11
Antenna
adjusting azimuth, 6–14
coarse adjustment, 6–14
fine adjustment, 7–11
adjusting elevation, coarse adjustment, 6–17
attaching to the antenna mount, 6–12
pointing, 7–8
fine azimuth adjustment, 7–9
fine elevation adjustment, 7–9
initial (coarse) azimuth adjustment, 6–14
initial (coarse) elevation adjustment, 6–17
troubleshooting, 9–4
voltage indications, 7–11
replacing, 10–7
repointing, 7–12
Antenna boresight, 6–15
Antenna mount
installing, 6–5, 6–8
parts (illustrated), 6–5
torque, 6–16, 6–18
torque wrench, 6–4
ATM. See OC3c–ATM SSI
Attenuator, 7–12
entering the attenuator value, 7–13
installing, 6–19
replacing the antenna, 10–7
replacing transceiver, 10–5
size, 6–19
Azimuth
adjusting
coarse adjustment, 6–14
fine adjustment, 7–11
explained and illustrated, 6–14
Azimuth/elevation adjusters. See Adjusters for
azimuth and elevation
B
Ballast. See Concrete blocks
Bend radius (IFL cable), 4–8, 4–13
Blocks. See Concrete blocks (ballast)
Boresight, 6–15
Buttons on CCM, 7–5
functions, 7–7
C
Cable length
DS3–ATM, 3–28
DS3–TDM SSI, 3–28
DS3–Transparent SSI, 3–29
IFL, 4–5
Quad–DS1 SSI, 3–27
Universal–DS1 SSI, 3–28
Canadian Interference–Causing Equipment
Regulations, B–2, B–3
Canadian Standards Association, B–2, B–3
CCM
button functions, 7–7
buttons on front panel, 7–5
configuration downloading, 7–17
functions, 3–23
installing, 3–23
LEDs, 3–25
operational state, 7–17
power–on test, 3–25
replacing, 10–12
status, 7–14
SUDS, 3–25
troubleshooting, 9–2
Channel and control module. See CCM
Chassis. See IDU chassis
Checklist
installation tasks, 1–3
materials, 2–6
tools, 2–3