User's Manual

1027145–0001 Revision D Installing indoor hub equipment 6–23Hub installation
If the rectifier–to–chassis power circuit does not include a suitable
circuit breaker, you can satisfy the disconnect requirement by
including a remote power–off switch as shown in figures 6-13 and
6-14. If the power circuit already includes a suitable circuit
breaker, skip this section.
1
2
3
4
5
hb006
DC power cable
Conduit
Remote
power-off
circuit
Rectifier
IDU chassis
Figure 6-13 The remote power–off circuit (if needed) is
installed between the IDU chassis and dc power source.