User's Manual

1027145–0001 Revision D 4–18 Installing ODUs Hub installation
3. With the antenna radome facing in the direction of the
assigned HT sector, position the round, flat surface of the
antenna bracket approximately 1 inch (2.5 centimeters)
from the mast interface.
4. Rotate the antenna approximately 45° away from the HT
alignment direction (assigned sector) until the antenna
bracket reliefs (curved indentations) are aligned with the
four nuts on the mast interface, as shown in figure 4-13.
T0006003
Relief (1of 4)
Locking nut
(1 of 4)
Mast
interface
Relief
Close-up view:
Antenna bracket reliefs
45
Alignment direction
Antenna
Figure 4-13 Rotating the antenna so the antenna
bracket can be placed against the mast interface
5. Press the antenna against the mast interface.