User's Manual

1027145–0001 Revision D 4–24 Installing ODUs Hub installation
For fine elevation adjustment (next subsection), install the second
azimuth/elevation adjuster as shown in figure 4-19.
hb039
Antenna bracket
Finger tighten
thumbscrew.
3.
Place clamp on antenna bracket.
(To move clamp, turn adjuster bolt.)
2.
Install the second
adjuster in vertical
position for elevation
adjustment.
Insert peg
into hole.
1.
Previously installed
adjusterazimuth
Adjuster
bolt
Figure 4-19 Installing the second adjuster, for elevation adjustment
Installing the elevation
adjuster