Installation Manual

1027145–0001 Revision D Installing ODUs 4–13Hub installation
Attach the temporary installation collar to the mast, as follows:
1. Point the two long arms away from the assigned HT sector,
as shown in figures 4-8 and 4-9.
2. Position the collar and clamp on opposite sides of the mast,
and swing the clamp toward the collar until you can
“capture” the clamp by swiveling the free–swinging bolt
into the slot in the clamp.
hb067
Collar
Swing clamp
toward collar.
Mast
Bolt
Bolt
Point these arms
from the
assigned HT
sector.
away
Figure 4-8 Attaching the temporary
installation collar to the mast