Installation Manual

1027145–0001 Revision D Installing ODUs 4–25Hub installation
Now adjust the elevation more precisely:
1. Place an inclinometer on the top surface of the antenna, as
shown in figure 4-20.
T0006007
Downward elevation angle
(may also be upward, depending on
network configuration)
Antenna
(front)
Inclinometer
Figure 4-20 Inclinometer on top of the antenna
2. Use a wrench to turn the adjuster bolt on the elevation
adjuster (figure 4-19) until the antenna is set to the specified
elevation angle, as indicated by the inclinometer.
Fine elevation
adjustment