Installation Manual

1027144–0001 Draft – Revision D.01iv
RT installation
6 Installing ODUs 6–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1 Introduction 6–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2 Transporting the ODU to the roof 6–4. . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3 ODU installation and alignment tools 6–5. . . . . . . . . . . . . . . . . . . . . . . .
6.4 Installing the temporary collar 6–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5 Installing the antenna mount 6–10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.6 Attaching the antenna to the mount 6–12. . . . . . . . . . . . . . . . . . . . . . . . . .
6.7 Initial (coarse) antenna azimuth adjustment 6–15. . . . . . . . . . . . . . . . . . .
6.8 Adjusting the antenna elevation 6–17. . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.9 Checking the radome drain position 6–18. . . . . . . . . . . . . . . . . . . . . . . . .
6.10 Installing the mechanical attenuator 6–19. . . . . . . . . . . . . . . . . . . . . . . . .
6.11 Attaching the transceiver to the antenna 6–21. . . . . . . . . . . . . . . . . . . . . .
6.12 Grounding the ODU 6–23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.13 Connecting the IFL to the ODU 6–25. . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.14 Finer antenna azimuth adjustment 6–26. . . . . . . . . . . . . . . . . . . . . . . . . . .
6.15 Finer antenna elevation adjustment 6–28. . . . . . . . . . . . . . . . . . . . . . . . . .
7 Commissioning the RT 7–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1 Prerequisites for commissioning 7–2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2 Connecting the IFL to the CCM (IDU) 7–3. . . . . . . . . . . . . . . . . . . . . . .
7.3 Front panel LCD operation 7–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.4 Pointing the antenna 7–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.5 Removing the installation tools 7–13. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.6 Verifying HT acquisition 7–14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.7 Checking component status 7–14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.8 RT to HT connection tests 7–19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Final steps 8–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.1 Weatherproofing 8–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2 Inspection, cleanup, and sign–off 8–3. . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3 Connecting customer equipment 8–3. . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 Troubleshooting 9–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.1 Troubleshooting flow charts 9–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.2 Additional troubleshooting information 9–6. . . . . . . . . . . . . . . . . . . . . .
9.3 Repair or replacement service 9–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 Maintenance 10–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.1 Adding or moving SSIs 10–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.2 Replacing components 10–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.3 Replacing the ODU 10–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.4 Replacing the IDU chassis 10–10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.5 Replacing the CCM 10–12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.6 Replacing SSIs 10–13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .