Installation Manual
Table Of Contents
RT INSTALLATION
1027144–0001 Draft – Revision D.01
Installing ODUs 6–1
RT installation
Chapter 6
Installing ODUs
This chapter explains how to install RT ODUs. It includes:
• Introduction – page 6–2
• Transporting the ODU to the roof – page 6–4
• ODU installation and alignment tools – page 6–5
• Installing the temporary collar – page 6–6
• Installing the antenna mount – page 6–10
• Attaching the antenna to the mount – page 6–12
• Adjusting the antenna azimuth (coarse adjustment) –
page 6–15
• Adjusting the antenna elevation (coarse adjustment) –
page 6–17
• Checking the radome drain position – page 6–18
• Installing the mechanical attenuator – page 6–19
• Attaching the transceiver to the antenna – page 6–21
• Grounding the ODU – page 6–23
• Connecting the IFL to the ODU – page 6–25
• Adjusting the antenna azimuth (finer adjustment) –
page 6–26
• Adjusting the antenna elevation (finer adjustment) –
page 6–28
For ODU standards compliance information, see appendix B
(page B–2).
For ODU location requirements, see page 5–3.