Installation Manual

1027144–0001 Draft – Revision D.01
Installing ODUs 6–5
RT installation
Figure 6-3 shows the specialized tools included in the AIReach
Broadband ODU installer tool kit (HNS 1024668–0024).
You use these tools during installation and pointing to:
• Support the antenna mount and ODU and
• Adjust the antenna azimuth and elevation
Instructions for these procedures are included in the following
sections.
When installation and pointing are complete, you remove the
temporary installation collar, clamp, and adjusters so you can
reuse them for subsequent installations.
Figure 6-3 ODU installer tool kit (all shaded parts)
Mast
Adjuster
bolt
Elevation
adjuster
Detail
Adjuster
bolt
Azimuth adjuster
Detail
hb034
Antenna mount
Antenna bracket
The azimuth and elevation
adjusters are identical.
Either adjuster can be
mounted in the horizontal
position to adjust antenna
azimuth or the vertical
position to adjust antenna
elevation, as shown.
Detail
Temporary
installation
collar
Clamp
6.3
ODU installation
and alignment tools