User's Manual

18
 Using the Hughes 9
Revision 0.2
If you want to setup additional ranges of addresses, please follow
the same instructions as above.
You cannot overlap the IP address ranges. If you do, an error
will pop-up telling you that you have an overlap region. Check
all of the ranges for overlaps and try again.
When you are finished, click on ―Apply‖ and you should see a
message saying ―Operation Successful‖.
DHCP Automatic Contexts: This option allows you to set up
the UT for dynamic standard ACA. This means that any device
connected to the UT via DHCP, whether wired or wirelessly will
automatically receive a standard context.