User's Manual

Hughes 9350 BGAN Terminal User Guide 17
ACA
This web page allows you to use Automatic Context Activation (ACA) in two different ways;
using static IP addresses in the TE device you can establish an automatic PDP context with any
QoS that is offered by the network (upper half of the web page)or using DHCP from the UT, you
can establish an automatic background PDP context for any TE that connects to the UT (lower
part of the web page).
ACA settings for TEs with Static IP address:
You can setup your own range of static IP addresses for setting up an automatic PDP context
with any of the QoS’s offered by the network.
To turn on a particular range of addresses, select the “On” radio button and choose a range of
addresses, low and high to use (e.g. 192.168.128.200 to 192.168.128.205) or leave the defaults.
Next select the desired QoS for that range of IP addresses (e.g. 32K streaming). The APN listed is
the default APN read from the USIM card (bgan.inmarsat.com). If your USIM is provisioned for
more than one APN, then you can type a secondary APN in this field.
If your Service Provider requires a username and password, enter them in the next two fields.