User's Manual

18 Hughes 9350 BGAN Terminal User Guide
If you want to setup additional ranges of addresses, please follow the same instructions as
above. Note: You cannot overlap the IP address ranges. If you do, an error will pop-up telling
you that you have an overlap region. Check all of the ranges for overlaps and try again.
When you are finished, click on “Apply” and you should see a message saying “Operation
Successful”.
ACA settings for TEs using DHCP assigned IP address: This option allows you to set up the UT for
dynamic background ACA. This means that any device connected to the UT, will automatically
receive a background PDP context.
To activate this feature, select the “On” radio button under ACA settings for TEs using DHCP
assigned IP address and click on “Apply”.