User's Manual

22 Hughes 9350 BGAN Terminal User Guide
A NTENNA
This web page allows you to monitor the status of the antenna. Note: This page does not
automatically update and must be refreshed to poll for the latest status.
ATB State: This field indicates the detailed state of the antenna tracking board and indicates
whether the antenna is tracking or searching for the satellite
Elevation: the current elevation angle of the antenna
Frequency (KHz): the frequency of the global beam in kHz that the antenna will attempt to
track. If the unit is experiencing problems, use the table below to verify the antenna is searching
for the correct satellite for your location
Antenna Tracking: indicates (TRUE or FALSE) whether or not the antenna is currently tracking the
satellite
ABIT results: these fields indicate if any errors are found in the antenna during startup self test:
• 0 indicates no error
• 255 indicates the test has not yet been run
• Any other value indicates a problem. If the same code is seen repeatedly, contact your
service provider