User's Manual

Hughes 9350 BGAN Terminal User Guide 33
D ECLARATION OF CONFORMITY
Hughes Network Systems, LLC, of 9605 Scranton Road, San Diego, CA, 92121, USA, declares
under our sole responsibility that the product Hughes 9400 Series Satellite IP Terminal to which this
declaration relates, is in conformity with the following standards and/or other normative
documents:
ETSI EN 301 444, ETSI EN 300 328, ETSI EN 301 489-1, ETSI EN 301 489-17, ETSI EN 301 489-20, EN 62311,
EN 60950-1.
We hereby declare that all essential radio test suites have been carried out and that the above
named product is in conformity to all the essential requirements of R&TTE Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in Annex [III] or [IV] of
Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies):
Nemko AS, Gaustadalleen 30, P.O. Box 73, Blindern, N-0314 Oslo, Norway
Identification mark: 0470 (Notified Body number).
The technical documentation relevant to the above equipment will be held at:
• Hughes Network Systems, LLC, 9605 Scranton Road, San Diego, CA, 92121, USA
• Signed by Nigel Bartlett (Senior Technical Director, September, 2009) and Bill Lindsay
(Senior Program Manager, September, 2009)

Note
The Ethernet cable used with the Hughes 9400 Series shall not be longer than 3
meters to comply with ETSI emissions requirements.
FCC C OMPLIANCE
• This device conforms to the FCC rules. Any changes or modifications to Hughes Network
Systems’ equipment, not expressly approved by Hughes Network Systems, could void the
user's authority to operate the equipment.
• To comply with FCC RF exposure requirements, this device must be operated with a
minimum separation distance of 20 cm or more from a person's body. Other operating
configurations should be avoided.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions; (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.