Installation Instructions
Table Of Contents
- Title page
- Contents
- About this manual
- Safety information
- Ch 1 - Introduction
- Ch 2 - Adding cards to the Controller
- Unpacking the System Controller
- Unpacking the picocells
- System Controller card configuration
- Adding cards to the System Controller (first steps)
- Jumper and DIP switch settings
- Attaching bus cables
- Adding cards to the System Controller (final steps)
- Configuring Controller cards
- Verifying the card configuration
- Ch 3 - Installing the Controller
- Ch 4 - Verifying the Controller configuration
- Ch 5 - Configuring the router
- Ch 6 - Testing picocells
- Ch 7 - Installing picocells
- Ch 8 - Connecting to external equipment
- Ch 9 - System testing
- Ch 10 - Installation inspection
- Ch 11 - Provisioning
- Ch 12 - Remote Client
- Ch 13 - Troubleshooting
- Ch 14 - Maintaining Quad T1 cards
- App A - Specifications
- App B - Standards compliance information
- App C - Part numbers
- App D - Updates and backups
- Index
1026209–0001 Revision B xii About this manual
The AIReach Office documentation set for each user is listed
below with the documentation number and description of the
manual.
All audiences
AIReach Office CD–ROM (1026207–0001)
Contains PDF files of all documents for online viewing.
Phone user audience
AIReach Office Mobile Phone Network Features Quick Guide
(1027893–0001)
Describes how to use each of the features of the AIReach Office
System phone.
Network administrator audience
Site Preparation Manual (1026208–0001)
Describes the tasks required to prepare the site for the AIReach
Office System, including the System Controller and picocell
specifications.
Getting Started (1027677–0001)
Provides an introduction for using the system and its user
interface. Describes logging on and off, manipulating screens and
menus, navigating through the user interface and using Help are
included in this manual. (Also applicable for the provider
audience).
Network Administrator’s Guide (1027680–0001)
Describes the regular scheduled and non–scheduled tasks the
network administrator performs. This manual includes directions
for subscriber provisioning, software upgrade, backup, and
operator management and security. It also includes first–level
troubleshooting instructions.
Provider audience
Installation and Commissioning Manual (1026209–0001)
Describes how to install and commission the AIReach Office
system, including: picocell installation, System Controller
hardware and software configuration, System Controller
installation, cabling the system, commissioning the system, and
installation troubleshooting.
Configuring the System (1027678–0001)
Describes how to configure all of the elements that are a part of
the system, including the system, System Controller, picocells,
NSS/MSC, and BSCs.
Monitoring System Performance, Troubleshooting, and
Alarms (1027679–0001)
Describes how to monitor the status of the system and its
components, and how to troubleshoot the system when problems
occur. Also includes instructions for disaster recovery.
AIReach Office
documentation set