Installation Instructions

Table Of Contents
10262090001 Revision B
Introduction 1–11
To install and service the AIReach OS, you need the tools and
materials listed below.
The following tools are required to complete the AIReach OS
installation:
Cell phones (2 – Nokia 6160 or 6161 for PCS and 800
MHz; Nokia 6120 for 800 MHz only)
Punchdown block tool with BIX, 66 block, and 110 die
Step ladder (6 foot minimum, per team)
Level
Stud finder
Tone chaser/generator
Tape measure (10–foot minimum)
Crimp tool with RJ–45 die
Crimp tool with RJ–11 die
Multimeter
Hole saw
Wire stripper/cutter
Fish tape
Flashlight
Scissors
Flushcuts
Anti–static wrist strap
Power strip (multi–socket extension cord)
Common hand tools (screwdrivers, pliers, hammer)
Tool case/bag
In addition, the following tools are recommended:
Two–way radio (2 each)
Mini–Champ (or equivalent) signal strength measurement tool
Label maker (P–touch or equivalent)
Cordless drill (with bits)
Cable tester
Staple gun
1.5
Tools and materials
Required tools
Recommended tools