User's Manual

Setup SOP:

 EUT LAN IP：192.168.42.1

 EUT WiFi 2.4G SSID：HUGHES_24G

 EUT WiFi 5G SSID：HUGHES_5G

1. The is currently connected to the Test Board(simulation of end-product), please

connect the Test Board to the Adapter to power on the EUT

2. Set NB1 WiFi IP to 192.168.42.x1, and connect to module 2.4G SSID through WiFi

function (connection password: xxxxxxxx)

3. Set the NB2 WiFi IP to 192.168.42.x2, and connect to the SSID of module 5G

through the WiFi function (connection password: xxxxxxxx)

4. Set the NB3 LAN IP to 192.168.42.x3, and connect to the Ethernet port on the

module mainboard via RJ45 cable

5. Set the NB4 LAN IP to 192.168.42.x4, and connect to the Ethernet port on the

module mainboard via RJ45 cable

6. After NB1~NB4 are all connected to EUT, all NBs can continue to ping module IP

(192.168.42.x).