User Guide
To install, remove, or replace the battery in the AAA battery pen, perform the following steps:
a. Unscrew the top half of the pen from the bottom half. The junction is at the upper edge of the rubberized grip
portion of the pen.
b. Allow the old battery to fall out of the top half of the pen. Dispose of the battery in accordance with local regulations.
c. Insert a new AAA alkaline battery (not included) in the top half of the pen. The positive lead should be visible in the
open pen half so that it makes contact with the bottom half when the pen is reassembled.
d. Carefully line up the threads of the bottom and top halves of the pen and screw it together. Take care not to cross
thread the pen because the plastic threads can be easily damaged. Screw the pen together firmly but not too tight.
1.2 Replacing the Battery in the AAA Battery Pen
The AAA battery pen should be stored in such a way that nothing touches the tip. Prolonged pressure on the tip,
even a slight pressure, can damage the ability of the pen to use the full range of pressure sensitivity.
If the pen will simply be unused overnight or for any other short period of time, placing it in the included pen holder
or horizontally on the desk is sufficient. For long-term storage or shipping, the tip and battery should be removed.
1. AAA Battery Pen
1.1 Storing the AAA Battery Pen
III. Pen Storage and Maintenance
1.3 Replacing the Pen Tip
If the pen tip needs replacing or removal due to long-term storage, perform the following steps as applicable:
a. Open the pen holder and remove the metal pen clip.
b. Position the pen clip over the exposed portion of the pen tip. Squeeze the clip with your fingers to provide a firm
grip on the tip.
c. Pull gently until the tip is completely removed.
d. Take a replacement tip out of the pen holder and gently insert it into the pen until it is fully seated into place.
e. Use the Pressure Test dialog in the driver utility to test the operation of the newly replaced tip.
Power ON/OFF
Button2
Button1
Pen tip
Unscrew Unscrew
Cathode upward
Anode downward
-15-
Content
Content