Kamvas Pro 20 User Manual For Windows and Macintosh OS Model: GT-192
Kamvas Pro 20 Precautions 1. Please read this manual carefully before using, and keep it well for future reference. 2. Before cleaning the display please unplug the USB cable and wipe with a soft damp cloth, do not use any kind of detergents. 3. Please don’t place the display near water sources such as bathtub, washbasin, sinks, washing machine, damp basement, swimming pool, etc. 4. Do not place the display on where is unstable or a height for children reaching easily in order to avoid danger. 5.
Kamvas Pro 20 Contents 1. Product Overview .............................................................................................................. 3 1.1 Display Introduction ............................................................................................................ 3 1.2 Product and Accessories ..................................................................................................... 3 1.3 Setting up Display ................................................................
Kamvas Pro 20 1. Product Overview 1.1 Display Introduction Thanks for choosing HUION® Kamvas Pro 20 Pen display. This is a new generation of desktop-level professional drawing display, which can greatly improve your work efficiency of painting and creation, and full of fun. You can freely painting and writing, depicting different lines and colors, just as the pen writes on the paper, which brings you a real shock experience.
Kamvas Pro 20 1.2.2 Adjustable Stand We designed this ergonomic adjustable stand specially for your KAMVAS display, you can adjust the angle of the display according to your usage habit, and make you feel more comfortable when painting and creating. By dragging this switch to adjust the stand angle from 20°- 80° 1.2.3 Accessories Stylus Pen USB Cable Quick Start Guide 4 / 20 Pen Holder Pen Nibs Nib Clip HDMI Cable Power Cable Power Adapter Warranty Card Glove Cleaning Cloth www.huion.
Kamvas Pro 20 1.3 Setting up Display 1. Take out the pen display and stand from the package, then assemble the stand to the back of the display with attached screwdriver according to the following instruction. 2. As shown on the below, connect the pen display to your computer with attached power adapter, HDMI cable and USB Cable. 3. Press the power button on the bottom of the display to power on the display 1.4 Installing the Driver 1.4.1 OS Support Windows 7 or later，macOS 10.12 or later 1.4.
Kamvas Pro 20 Notice： 1. Before installing, you need to uninstall other driver of similar products, including the old driver of this product. 2. Before installing, please close all graphics software and anti-virus software to avoid unnecessary mistake. 1.5 Pen Nib Replacement The nib will be wear out after using for a long time, then you need to replace a new nib. 6 / 20 www.huion.
Kamvas Pro 20 2. Product Basic Operation 2.1 Using The Pen 2.1.1 Hold the pen Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle the side switch easily with your thumb or forefinger. Be careful not to accidentally press the switch while drawing or positioning with the pen. Notice: When not in use, place the pen in the pen case or on the desk.
Kamvas Pro 20 2.1.3 Click Use the pen tip to tap on the screen once to produce a click. Tap to highlight or select an item on the screen and double-click to open it. 2.1.4 Move Select the object, then slide the pen tip across the screen to move it. 2.1.5 Use the side buttons The side buttons of the pen can be set to two different customizable functions. You can use the buttons whenever the pen tip is within 10mm of the display active area.
Kamvas Pro 20 2.2 OSD Setting 2.2.1 OSD Buttons POWER : Power on/off the display. MENU : Press to call up the menu, after entering menu, it’s function is confirm. : After entering menu, it’s function is to up/right/increase. : After entering menu, it’s function is to down/left/decrease. AUTO : Before entering menu, it’s function is auto adjustment. After entering menu, it’s function is back to previous menu. 2.2.2 Brightness Setting 1. BRIGHTNESS: Adjusting background brightness of the screen images.
Kamvas Pro 20 2.2.3 Image Setting 1. H.POSITION: Adjusting images left and right by using the buttons“+”and“-”. 2. V.POSITION: Adjusting images downward and upward by using the buttons“+”and“-”. 3. CLOCK: Adjusting the vertical blinking of characters on the screen. 4. PHASE: Adjusting the horizontal blinking of characters on the screen. 5. ASPECT: There are“WIDE”and“4:3”two modes for you to adjust the aspect of the screen. 2.2.4 Color Temp. Setting COLOR TEMP.
Kamvas Pro 20 2.2.5 OSD Setting 1. LANGUAGE: There are 12 languages for your choice. 2. OSD H. POS.: Adjusting the OSD position left and right by using the buttons “+”and“-” 3. OSD V. POS.: Adjusting the OSD position downward and upward by using the buttons“+”and“-” 4. OSD TIMER: Increase and decrease the residence time of the OSD menu by using the buttons“+”and“-”. 5. TRANSPARENCY: Press “MENU”, then“+”and“-”to adjust the transparency of the OSD menu. 2.2.6 Reset 1.
Kamvas Pro 20 2.2.7 MISC MISC: Display the current adjustment information. 3. Function Setting 3.1 Device Connection Prompt 1. Device disconnected: The computer does not recognize the tablet. 2. Device connected: The computer has recognized the tablet. 3.2 Working Area Setting 3.2.1 Using Multiple Monitors When the KAMVAS and other monitors are used in the same system, the movement of the screen cursor on the standard display depends on the system configuration. 12 / 20 www.huion.
Kamvas Pro 20 If the secondary display is a mirrored mode connection, KAMVAS and another monitor will display exactly the same image and screen cursor movement. If you are in the extended display mode, you need to set the display on the driver that which portion of the display screen your KAMVAS will map to. 3.2.2 Working Area Setting Define the display area that will be mapped to the screen area. 1. Full Area: the entire active area of the Display. This is the default setting. 2. Same Ratio with LCD. 3.
Kamvas Pro 20 3.2.3 Rotate Working Area By changing the direction of the tablet to adapt to the left and right hand operation. You can rotate the tablet by 0°,90°,180° or 270°. 3.3 Press Keys Function Setting Default Setting: Place the cursor on the button or click the button icon to see the default values for the press keys. Customized Setting: Select the function to be achieved on the pop-up dialog box, then click APPLY or OK to take effect.
Kamvas Pro 20 3.4 Pen Button Function Setting Select the function to be achieved on the pop-up dialog box, then click APPLY or OK to take effect. 3.5 Pressure Sensitivity Setting The pressure sensitivity will be changed by dragging the slider up and down, the smaller the value, the more sensitive the pressure. 15 / 20 www.huion.
Kamvas Pro 20 3.6 Pen Pressure Testing Click “start pressure test”, you can gradually apply pressure to the stylus on the screen to test the pressure level. Click “Clear” button to clear all the ink. 3.7 Calibration Screen Calibration: Click the red point of the cross center appearing on the screen to complete the calibration. Restore Factory Settings: Click "Restore Default" to restore to the factory settings.
Kamvas Pro 20 3.8 Enable the Windows Ink feature Microsoft Windows provides extensive support for pen input. Pen features are supported in such as Microsoft Office、Windows Journal、Adobe Photoshop CC、 SketchBook 6 and so on. 3.9 Data Export and Import The driver supports exporting and importing your customized configuration data of the product, which is convenient for you to use different software and avoid the trouble of repeated settings. 17 / 20 www.huion.
Kamvas Pro 20 4. Specifications Model Screen GT-192 Panel Size 19.53 inch Resolution 1920 x 1080(16:9) LCD Type TFT LCD IPS Active Area 434.88 x 238.68mm Brightness 250cd/m2 Response Time 25ms View Angle Touch Pen 100% sRGB Display Color 16.7M Touch Type Battery-Free Electromagnetic Resonance Resolution 5080LPI Pressure Level 8192 Accuracy ±0.5mm（Center）,±3mm（Corner） Sensing Height 10mm Report Rate 266PPS Model PW 500 Pressure 8192 Levels Accuracy ±0.
Kamvas Pro 20 5. Trouble Shooting 5.1 Possible Breakdowns Related to DISPLAY Abnormal Phenomena Power indicator does not Possible Solutions *Make sure power is on *Check the socket and power cable flash 1. Make sure power is on. 2. Correctly connect the cable. 3. If you connect the display with a laptop, please make sure the display is on the right display mode: extend or duplicate mode. No display on the screen 4. Check whether the side indicator shows green, if not, it means no signal in.
Kamvas Pro 20 Note: Information in this manual is subject to change without further notice. For more information, please contact us with our email: service@huion.com Or go to our website (www.huion.com) to get the latest driver and user manual. 20 / 20 www.huion.
