User Manual
Table Of Contents
- 1.Product Overview
- 2. Product Basic Operation
- 3. Driver Setting
- 4. Specifications
- 5. Trouble Shooting
- There is no pressure in the graphics software but
- You may have installed other tablet drivers or ope
- The pen does not work
- 1. Make sure you are using the pen that originally
- 2. Make sure you installed the driver correctly.
- Press Keys does not work
- 1. Make sure the Press Keys function were enabled
- The computer can’t enter sleep mode
- When you are not using the tablet, please do not p
- 6. After-service Contact
HS611
5
/ 15 www.huion.com
1.4 Connecting to Android Phone
1. Please make sure your phone/tablet OS is as following: Android OS 6.0 or later
2. For some models, you need to go phone/tablet "Settings" then enable "OTG"
function.
3. Choose the right OTG Adapter from package, which depends on USB port type
of your phone/tablet, insert the wireless receiver into the OTG adapter, and then
insert the OTG adapter into the mobile phone interface. At this time, turn on the
tablet switch to communicate with the mobile phone through 2.4G wireless.
Notes:
1. The phone will reverse charge the tablet when they are wired connected and will
quickly drain the phone battery, so it can only be used by wireless connecting to
the phone.
2. The pen tablet can works without installing any driver into your phone/tablet.
3. Once connected, the tablet will automatically enter phone mode, in which the
pen can only work in the left gray area(166.7x104.2mm).
4. Please note that the press keys of pen tablet and digital pen are not supported in
phone mode.
1.5 Driver Installation
1.5.1 OS Support
Windows 7 or later，macOS 10.12 or later