User Manual
Table Of Contents
- 1. Product Overview
- 1.1 Display Introduction
- 1.2 Product and Accessories
- 1.3 Connected to Computer
- 1.3.1 Connected with 3-in-1 Cable
- 1.3.2 Connected with USB-C to USB-C Cable
- 1.4 Driver Installation
- Windows 7 or later，macOS 10.12 or later
- 1.5 Connected to Android Phone/Tablet
- As shown in the figure above, connecting your Andr
- 1.6 Pen Nib Replacement
- 2. Product Basic Operation
- 2.1 Using The Pen
- 2.2 Using the Display
- 2.3 OSD Function
- 3. Function Setting
- 3.1 Device Connection Prompt
- 3.2 Working Area Setting
- 3.3 Press Keys Function Setting
- 3.4 Pen Button Setting
- Select the function to be achieved on the pop-up d
- 3.5 Pressure Sensitivity Setting
- 3.6 Pen Pressure Testing
- 3.7 Calibration
- 3.8 Enable the Windows Ink feature
- 3.9 Data Export and Import
- 4. Specifications
- 5. Trouble Shooting
- 5.1 Possible Breakdowns Related to DISPLAY
- Power indicator does not flash
- *Make sure power is on *Check the socket and po
- No display on the screen
- 1. Make sure power is on.
- 2. Correctly connect the 3-in-1 cable.
- 3. If you connect the display with a laptop, pleas
- 4. Check whether the side indicator shows green, i
- 5. Is the signal wire broken or bent? If so, pleas
- Images are blurred
- Please set the display resolution with 1920 x 1080
- Lack of colors
- Check the pins of the signal wire are not bent or
- There is chromatic aberration
- As the regional color temperature is different, so
- Images jitter or ripple images appear
- It is likely that there is electric equipment near
- 5.2 Possible Breakdowns Related to FUNCTIONS
- 6. After-service Contact
Kamvas 13
7
/ 19 www.huion.com
the old driver of this product.
2. Before installing, please close all graphics software and anti-virus software to
avoid unnecessary mistake.
1.5 Connected to Android Phone/Tablet
As shown in the figure above, connecting your Android phone and pen display with
USB-C to USB-C USB 3.1 Gen1 cable and connecting the pen display and the power
adapter or power bank with USB-C to USB-A cable.
Note:
1. USB-C to USB-C cable and
USB-C to USB-A cable
is not included in the package
and requires extra cost. Please purchase the cable through official channels as it is
customized and cables from unknown sources may not be usable with the device.
2. The power adaptor is not included in the package and requires extra cost. Power
adaptor of your mobile phone is also compatible.
3. Please make sure your smart android phone support Dex or PC mode.
1.6 Pen Nib Replacement
The nib will be wear out after using for long time, then you need to replace a new
nib.