User Manual
Table Of Contents
- 1.Product Overview
- 2. Product Basic Operation
- 3. Driver Setting
- 4. Specifications
- 5. Trouble Shooting
- There is no pressure in the graphics software but
- You may have installed other tablet drivers or ope
- The pen does not work
- 1. Make sure you are using the pen that originally
- 2. Make sure you installed the driver correctly.
- Press Keys does not work
- 1. Make sure the Press Keys function were enabled
- The computer can’t enter sleep mode
- When you are not using the tablet, please do not p
- 6. After-service Contact
Q620M
5
/ 17 www.huion.com
1.3.2 Wireless Access Mode
1. Insert the wireless receiver to your computer.
2. Press the Power button to power on the tablet
3. When not using for 15mins, the tablet will enter sleep mode. In this case you
need to press the power button again to wake the tablet up.
1.4 Introduction to LED Indicator
There is a LED light embedded in the eight press keys respectively, which can
indicate the remaining battery power, low battery and the consumption of the
power in real time. When you power the pen tablet on, 8 LED lights will turn on one
after another, while lights will go off subsequently if you turn the pen tablet off.