User Manual
Table Of Contents
- 1. Product Overview
- 1.1 Tablet Introduction
- 1.2 Product and Accessories
- 1.3 Tablet Connection
- 1.4 Driver Installation
- Windows 7 or later,macOS 10.11 or later
- 1.5 Pen Nib Replacement
- 1.6 Charging the Pen
- 2. Product Basic Operation
- 2.1 Using The Pen
- 2.2 Using the Tablet
- 3. Function Setting
- 3.1 Device Connection Prompt
- 3.2 Working Area Setting
- 3.3 Press Keys Function Setting
- 3.4 Pen Buttons Function Setting
- Select the function to be achieved on the pop-up dialog box, then click APPLY or OK to take effect.
- 3.5 Pressure Sensitivity Setting
- 3.6 Pen Pressure Testing
- 3.7 Enable the Windows Ink feature
- 3.8 Data Export and Import
- 4. Specifications
- 5. Trouble Shooting
- 5.1 Possible Breakdowns Related to TABLET
- 5.2 Possible Breakdowns Related to SYSTEM
- 6. CE and FCC Notice
- 7. After-service Contact
- Word 书签
Q11K Wireless Graphics Tablet
7 / 19 www.huion.com
1.5 Pen Nib Replacement
The nib will be wear out after using for a long time, then you need to replace a new
nib.
1. Anticlockwise rotate the pen holder to open the bottom cover,then you can see
the build-in nib clip.
2. Insert the pen nib into the hole and tilt the pen to pull out the old nib.
3. Insert the new nib straight into the pen and push the nib slowly and firmly until it
stops.
1.6 Charging the Pen
1. When the indicator on the pen shows orange, it means the voltage of the pen is
low, and then you need to charge the pen.
2. Charge the pen with the attached pen charging cable. Insert one end of the
charging cable into the rear of the stylus charging port, the other end can be
connected to a computer, power supply or power bank.