Q11K Wireless Graphics Tablet User Manual For Windows and Macintosh OS
Q11K Wireless Graphics Tablet Precautions 1. Please read this manual carefully before using, and keep it well for future reference. 2. Before cleaning the tablet please unplug the power cord and wipe with a soft damp cloth, do not use any kind of detergents. 3. Don’t expose this product to water or other liquids. Take care to never spill liquids onto the tablet and pen. Exposing this product to water or other liquids may cause product malfunction or electrical shock. 4.
Q11K Wireless Graphics Tablet Contents 1. Product Overview............................................................................................................................3 1.1 Tablet Introduction................................................................................................................3 1.2 Product and Accessories .......................................................................................................3 1.3 Tablet Connection ...................................
Q11K Wireless Graphics Tablet 1. Product Overview 1.1 Tablet Introduction Thanks for choosing HUION®INSPIROY® Q11K wireless graphics tablet. This is a new generation of portable professional drawing tablet, which can greatly improve your work efficiency of painting and creation, and full of fun. You can freely painting and writing, depicting different lines and colors, just as the pen writes on the paper, which brings you a real shock experience.
Q11K Wireless Graphics Tablet 1.2.2 Stylus Pen The stylus pen is a rechargeable pen with 8192 levels pressure sensitivity and can be used for around 350hrs with full battery. Charging Port LED Indicator Upper Button（Mouse Right Key ） Lower Button（Switch Brush） Pen Nib（Mouse Left Key） 1.2.3 Wireless Receiver When using wireless mode, please insert the receiver into your computer and unplug the USB cable in the same time. 4 / 19 www.huion.
Q11K Wireless Graphics Tablet 1.2.4 Other Accessories Micro USB Cable Quick Start Guide Pen Charging Cable Replacement Nibs Pen Holder 1.3 Tablet Connection 1.3.1 Wired Mode Connection 1. Connect the tablet to your computer with USB cable. 5 / 19 www.huion.
Q11K Wireless Graphics Tablet 1.3.2 Wireless Mode Connection 1. Insert the wireless receiver to your computer. 2. Toggle the switch down on the left side to power on the tablet. 3. When not using for 15mins, the tablet will enter sleep mode. In this case you need to toggle the switch off- then switch on to wake the tablet up. 1.4 Driver Installation 1.4.1 OS Support Windows 7 or later，macOS 10.11 or later 1.4.2 Install via Download Please download the driver from our website: www.huion.
Q11K Wireless Graphics Tablet 1.5 Pen Nib Replacement The nib will be wear out after using for a long time, then you need to replace a new nib. 1. Anticlockwise rotate the pen holder to open the bottom cover,then you can see the build-in nib clip. 2. Insert the pen nib into the hole and tilt the pen to pull out the old nib. 3. Insert the new nib straight into the pen and push the nib slowly and firmly until it stops. 1.6 Charging the Pen 1.
Q11K Wireless Graphics Tablet 2. Product Basic Operation 2.1 Using The Pen 2.1.1 Hold the pen Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle the side switch easily with your thumb or forefinger. Be careful not to accidentally press the switch while drawing or positioning with the pen. Notice：When not in use, place the pen in the pen case or on the desk.
Q11K Wireless Graphics Tablet 2.1.3 Click Use the pen tip to tap once on the screen to register a click. Tap to highlight or select an item on the screen and double-click to open it. 2.1.4 Move Select the object, then slide the pen tip across the screen to move it. 2.1.5 Use the side buttons The buttonson the pen can be set to two different customizable functions. You can use the buttons whenever the pen tip is within 10mm of the tablet active area.
Q11K Wireless Graphics Tablet 2.2 Using the Tablet 2.2.1 Power Switch 1. The power switch was placed on the top left side of the tablet, when you use the tablet on wireless mode, you need to turn on the power switch before using. 2. When not use the tablet for 15 minutes or press the power button for 3 seconds, it will enter sleep mode. 3. LED indicator: When working: White-Detected pen or touch signal, Off-no pen or touch signal, Red flashes-Voltage is low, need to be charged.
Q11K Wireless Graphics Tablet 3. Function Setting 3.1 Device Connection Prompt 1. Device disconnected: The computer does not recognize the tablet. 2. Device connected: The computer has recognized the tablet. 3.2 Working Area Setting 3.2.1 Using Multiple Monitors Select the Working Area tab to define the relationship between pen movement on the tablet and cursor movement on the monitor screen. By default the entire active area of tablet maps to the entire monitor.
Q11K Wireless Graphics Tablet 3.2.2 Working Area Setting Define the tablet area that will be mapped to the screen area. 1. Full Area: the entire active area of the tablet. This is the default setting. 2. Customized Area: 1.> Enter coordinate values. or2>. Drag the corners of the foreground graphic to select the screen area. 3.2.3 Rotate Working Area By changing the direction of the tablet to adapt to the left and right hand operation. You can rotate the tablet by 0°,90°,180° or 270°. 12 / 19 www.huion.
Q11K Wireless Graphics Tablet 3.3 Press Keys Function Setting Default Setting：Place the cursor on the press key or click the press key to find the default values. Customized Setting：Select the function to be achieved on the pop-up dialog box, then click APPLY or OK to take effect. Enable/Disable Press Keys: Check/Uncheck”Enable Press Keys” 3.4 Pen Buttons Function Setting Select the function to be achieved on the pop-up dialog box, then click APPLY or OK to take effect. 13 / 19 www.huion.
Q11K Wireless Graphics Tablet 3.5 Pressure Sensitivity Setting The pressure sensitivity will be changed by dragging the slider up and down, the smaller the value, the more pressure sensitive. 3.6 Pen Pressure Testing Click “start pressure test”, you can gradually apply pressure to the stylus on the screen to test the pressure level. Click “Clear” button to clear all the ink. 14 / 19 www.huion.
Q11K Wireless Graphics Tablet 3.7 Enable the Windows Ink feature Microsoft Windows provides extensive support for pen input. Pen features are supported in such as Microsoft Office、Windows Journal、Adobe Photoshop CC、 SketchBook 6 and so on. 3.8 Data Export and Import The driver supports exporting and importing your custom configuration data of the product, which is convenient for you to use different software and avoid the trouble of repeated settings. 15 / 19 www.huion.
Q11K Wireless Graphics Tablet 4. Specifications Graphics Tablet Model Q11K Touch Technology Electromagnetic Resonance Working Area 279.4 x 174.6mm(11 x 6.875 inch) Dimension 390 x 223 x 11mm Net Weight 0.88kg Touch Resolution 5080LPI Report Rate 233PPS Pen Sensing Height 12mm Interface Micro USB Press Keys 8 Customized Press Keys Wireless 2.4G Wireless Distance Approx. 10-20m (Depending on the actual use of the environment) Battery Capacity 2500mAh Life Time Approx.
Q11K Wireless Graphics Tablet 5. Trouble Shooting 5.1 Possible Breakdowns Related to TABLET Abnormal Phenomena Possible Solutions You may have installed other tablet drivers or opened the drawing There is no pressure in the graphics software but the cursor moves software when installing the driver. Please uninstall all drivers and close the drawing software, then reinstall the Huion driver. It’s better to restart your computer after finishing the installation.
Q11K Wireless Graphics Tablet 6. CE and FCC Notice This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components.
Q11K Wireless Graphics Tablet persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: G10T (FCC ID: 2AFEJ-H16WT) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.188W/kg and when properly worn on the body is 1.342W/kg.
