User Manual
Table Of Contents
- 1. Product Overview
- 1.1 Tablet Introduction
- 1.2 Product and Accessories
- 1.3 Tablet Connection
- 1.4 Driver Installation
- Windows 7 or later,macOS 10.12 or later
- 1.5 Pen Nib Replacement
- 2. Product Basic Operation
- 2.1 Using The Pen
- 2.2 Using the Tablet
- 3. Function Setting
- 3.1 Device Connection Prompt
- 3.2 Working Area Setting
- 3.3 Press Keys Function Setting
- 3.4 Pen Buttons Function Setting
- Select the function to be achieved on the pop-up d
- 3.5 Pressure Sensitivity Setting
- 3.6 Pen Pressure Testing
- 3.7 Enable the Windows Ink feature
- 3.8 Data Export and Import
- 4.Specifications
- 5.1 Possible Breakdowns Related to TABLET
- There is no pressure in the graphics software but
- You may have installed other tablet drivers or ope
- While using the tablet, the battery indicator flas
- The battery voltage is low, please recharge the ta
- The pen does not work
- 1. Make sure you are using the pen that originally
- 2. Make sure you installed the driver correctly.
- Press Keys does not work
- 1. Make sure the Press Keys function were enabled
- The cursor is not stable or the drawing line is no
- 1. Make sure there is no other 2.4G device surroun
- The computer can’t enter sleep mode
- When you are not using the tablet, please do not p
- 5.2 Possible Breakdowns Related to SYSTEM
- 6. CE and FCC Notice
- 7. After-service Contact
WH1409 V2 Wireless Graphics Tablet
18
/ 18 www.huion.com
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg
averaged over one gram of tissue. Device types: G10T (FCC ID: 2AFEJ-H16WT) has
also been tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use at the ear is 1.188W/kg and when
properly worn on the body is 1.342W/kg. This device was tested for typical
body-worn operations with the back of the handset kept 0mm from the body. To
maintain compliance with FCC RF exposure requirements, use accessories that
maintain a 0mm separation distance between the user's body and the back of the
handset. The use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that do not satisfy
these requirements may not comply with FCC RF exposure requirements, and
should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 0cm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device should
not contain any metallic components. Body-worn accessories that do not meet
these requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna.
7. After-service Contact
SHENZHEN HUION ANIMATION TECHNOLOGY CO.,LTD.
Building 28, Quarter 4, HuaiDeCuiGang Industrial Park, Fuyong Street, Bao'an District,
Shenzhen, 518106, China
Note: Information in this manual is subject to change without further notice.
For more information, please contact us with our email: service@huion.com
Or go to our website (www.huion.com) to get the latest driver and user manual.