User Manual
Table Of Contents
- 1. Product Overview
- 1.1 Tablet Introduction
- 1.2 Product and Accessories
- 1.3 Tablet Connection
- 1.4 Driver Installation
- Windows 7 or later，macOS 10.12 or later
- 1.5 Pen Nib Replacement
- 2. Product Basic Operation
- 2.1 Using The Pen
- 2.2 Using the Tablet
- 3. Function Setting
- 3.1 Device Connection Prompt
- 3.2 Working Area Setting
- 3.3 Press Keys Function Setting
- 3.4 Pen Buttons Function Setting
- Select the function to be achieved on the pop-up d
- 3.5 Pressure Sensitivity Setting
- 3.6 Pen Pressure Testing
- 3.7 Enable the Windows Ink feature
- 3.8 Data Export and Import
- 4.Specifications
- 5.1 Possible Breakdowns Related to TABLET
- There is no pressure in the graphics software but
- You may have installed other tablet drivers or ope
- While using the tablet, the battery indicator flas
- The battery voltage is low, please recharge the ta
- The pen does not work
- 1. Make sure you are using the pen that originally
- 2. Make sure you installed the driver correctly.
- Press Keys does not work
- 1. Make sure the Press Keys function were enabled
- The cursor is not stable or the drawing line is no
- 1. Make sure there is no other 2.4G device surroun
- The computer can’t enter sleep mode
- When you are not using the tablet, please do not p
- 5.2 Possible Breakdowns Related to SYSTEM
- 6. CE and FCC Notice
- 7. After-service Contact
WH1409 V2 Wireless Graphics Tablet
5
/ 18 www.huion.com
1.3 Tablet Connection
1.3.1 Wired Mode Connection
1. Connect the tablet to your computer with USB cable.
1.3.2 Wireless Mode Connection
1. Insert the wireless receiver to your computer.
2. Toggle the power switch to the left to power on the tablet.
3. When not using for 15mins, the tablet will enter sleep mode. In this case you
need to toggle the switch right- then left to wake the tablet up.