Data Sheet

ManualsBrandsHUIYUAN ManualsLEDs & AccessoriesSMD LED (multi-colour) 3528 Red, Green, Blue 600 mcd, 1150 mcd, 900 mcd

HUIYUAN OPTO-ELECTRONIC CO.,LTD

TECHNOLOGY DATA SHEET & SPECIFICATIONS

MODEL: 3528SURGBC

Page 1 of 5

Features

• P-LCC-4 package.

• Optical indicator.

• Ideal for backlight and light pipe application.

• Wide viewing angle.

• Suitable for vapor-phase reflow, Infrared reflow and

wave solder processes.

• Computable with automatic placement equipment.

• Available on tape and reel (8mm Tape).

• Pb-free.

Descriptions

• The 3528 series is available in red, green, blue

Due to the package design, the LED has wide

viewing angle and optimized light coupling by inter

reflector. This feature makes the ideal for light pipe

application. The low current requirement makes this

device ideal for portable equipment or any other

application where power is at a premium.

Usage Notes:

˙The LED is an electrostatic insensitive device, so static electricity and surge will damage the LED. It is

required to wear a wrist-band when handling the LED. All device, equipment, machinery, desk and ground

must be properly grounded

Applications

• Automotive: Backlighting in dashboard and switch.

• Telecommunication: Indicator and backlighting in

telephone and fax.

• Flat backlight for LCD’s, switches and symbols.

• Light pipe application.

• General use.

Summary of content (5 pages)

PAGE 1
HUIYUAN OPTO-ELECTRONIC CO.,LTD TECHNOLOGY DATA SHEET & SPECIFICATIONS MODEL: 3528SURGBC Features • P-LCC-4 package. • Optical indicator. • Ideal for backlight and light pipe application. • Wide viewing angle. • Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. • Computable with automatic placement equipment. • Available on tape and reel (8mm Tape). • Pb-free.
PAGE 2
HUIYUAN OPTO-ELECTRONIC CO.,LTD TECHNOLOGY DATA SHEET & SPECIFICATIONS MODEL: 3528SURGBC Device Selection Guide LED Part No. 3528SURGBC Chip Material Emitted Color AlGaInP Red InGaN Green InGaN Blue Lens Color Water clear Package Dimensions NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red.
PAGE 3
HUIYUAN OPTO-ELECTRONIC CO.,LTD TECHNOLOGY DATA SHEET & SPECIFICATIONS MODEL: 3528SURGBC Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Luminous Intensity Iv Viewing Angle 2θ1/2 Peak Emission Wavelength λp Spectral Line Half-Width △λ Forward Voltage VF Reverse Current IR Device Red Green Blue Red Green Blue Red Green Blue Red Green Blue Red Green Blue Red Green Blue Min. Unit Test Condition Typ. Max.
PAGE 4
HUIYUAN OPTO-ELECTRONIC CO.,LTD TECHNOLOGY DATA SHEET & SPECIFICATIONS MODEL: 3528SURGBC APPLICATION NOTES： 1)Soldering： ① Manual soldering by soldering iron： The use of a soldering iron of less than 25W is recommended and the temperature of the iron must be kept at no higher than 300℃. ② Reflow soldering： a. The temperature profile as shown in Fig.3 is recommended for soldering SMD LED by the reflow furnace. b.
PAGE 5
HUIYUAN OPTO-ELECTRONIC CO.,LTD TECHNOLOGY DATA SHEET & SPECIFICATIONS MODEL: 3528SURGBC ③ Ultrasonic：300W Max. 3) OTHERS： a. Care must be taken not to cause stress to the epoxy resin portion of SMD LED while it is exposed to the high temperature. b. Care must be taken not to the rub the epoxy resin portion of SMD LED with a hard or sharp edged article such as the sand blast and the metal hook as the epoxy resin is rather soft and liable to be damaged.