Data Sheet

ManualsBrandsHUIYUAN ManualsLEDs & AccessoriesLED wired Red, Green Circular 5 mm 2200 mcd, 2650 mcd

HUIYUAN OPTO-ELECTRONIC CO.,LTD.

TECHNOLOGY DATA SHEET & SPECIFICATIONS

MODEL：5019R1G3C-DSC

Page 1 of 5

Features

˙Two chips are matched for uniform

light output,wide viewing angle

˙Long life-solid state reliability

˙I.C.compatible/Low power consumption

˙Pb free

Descriptions

˙The LED lamps contain two integral

chips and is available as both bicolor and bipolar types

˙The Bright Red and Green light is emitted by diodes

of GaAsP/GaP and GaAsP/GaP respectively

˙Type of bipolar lamps are both White Diffused and

Color Diffused while the bicolor are White Diffused

Usage Notes:

˙The ultra bright LED is an electrostatic insensitive device,so static electricity and surge will damage the

LED.It is required to wear a wrist-band when handling the LED. All device, equipment,machinery, desk and

ground must be properly grounded

˙When using LED, it must use a protective resistor in series with DC current about 20Ma

Applications

˙Status indicators

˙Commercial use

˙Advertising Signs

˙Back lighting

Summary of content (5 pages)

PAGE 1
HUIYUAN OPTO-ELECTRONIC CO.,LTD. TECHNOLOGY DATA SHEET & SPECIFICATIONS MODEL：5019R1G3C-DSC Features ˙Two chips are matched for uniform light output,wide viewing angle ˙Long life-solid state reliability ˙I.C.
PAGE 2
HUIYUAN OPTO-ELECTRONIC CO.,LTD. TECHNOLOGY DATA SHEET & SPECIFICATIONS MODEL：5019R1G3C-DSC Device Selection Guide LED Part No. 5019R1G3C-DSC Chip Material Emitted Color AlGaInP Red InGaN Green Lens Color Water clear Package Dimensions Notes: ˙Other dimensions are in millimeters, tolerance is 0.25mm except being specified. ˙Protruded resin under flange is 1.5mm Max LED. ˙Bare copper alloy is exposed at tie-bar portion after cutting.
PAGE 3
HUIYUAN OPTO-ELECTRONIC CO.,LTD. TECHNOLOGY DATA SHEET & SPECIFICATIONS MODEL：5019R1G3C-DSC Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Luminous Intensity Iv Viewing Angle 2θ1/2 Peak Emission Wavelength λp Spectral Line Half-Width △λ Forward Voltage VF Reverse Current IR Device Red Green Red Green Typ. Max. Unit Test Condition 1500 1800 --- 2900 3500 mcd IF=20mA --- 35 --- Deg (Note 1) nm IF=20mA nm IF=20mA V IF=20mA µA VR=5V Min.
PAGE 4
HUIYUAN OPTO-ELECTRONIC CO.,LTD. TECHNOLOGY DATA SHEET & SPECIFICATIONS MODEL：5019R1G3C-DSC Typical Electro-Optical Characteristics Curves Forward Current VS.Forward Voltage Relative Intensity VS. Wavelength 25 Forward Current (mA) 0.8 0.6 0.4 0.2 20 G R 15 10 5 0 450 500 550 650 600 700 750 1.0 800 1.5 2.0 2.5 3.0 3.5 Forward Voltage (V) Wavelength (nm) Relative Intensity VS. Ambient Temp Forward Current VS.Relative Intensity 2.0 2.0 Relative Intensity (a.
PAGE 5
HUIYUAN OPTO-ELECTRONIC CO.,LTD. TECHNOLOGY DATA SHEET & SPECIFICATIONS MODEL：5019R1G3C-DSC Notes 1. Above specification may be changed without notice. HYLED will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets.