User's Manual

DATE: 03.16.10
DIVISION: FA
PRODUCT: Wireless Keyboard Instructions
NOTES: Artwork is scale.
GRAPHIC SPECS
PRINTED PAPER
GRAPHICS ARE SCALE
FOLD PAPER IN HALF ON DASHED LINES.
PRINTS CMYK
19/07/2010
FRONT
BACK
6cm
12cm
11cm
WIRELESS FLEXI KEYBOARD
INSTRUCTIONS
WIRELESS FLEXI KEYBOARD
INSTRUCTIONS
Features and specifications subject to change without
notice. Microsoft, Windows and Windows Vista are
either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or
other countries. All trademarks and registered
trademarks are the properties of their respective
owners. All rights reserved. ©2010
This 2.4 GHz Wireless Multimedia Keyboard is compatible with
MAC, Windows ME/2000/XP/Vista operating systems.
This package contains the following:
1- Wireless Multimedia Keyboard
1- USB Receiver
1- User Manual
Requires 2 AAA Batteries. (Not included.)
The maximum transmission distance is approximately 30ft (10m). The
operational distance will vary based on the environment in which the
keyboard is used and the amount of interference encountered.
The receiver and transmitter have auto-recognition capability and have
been preset to the same channel during production. Normally, you will
not need to reset them during installation.
INSTALLATION AND CONNECTION:
STEP 1:
Remove the battery compartment lid on the left side of the keyboard
and insert two AAA batteries as shown below. Please be careful not to
load the batteries incorrectly. There are guide marks inside the
compartment to make sure they are in the right direction. Replace the
battery compartment lid.
STEP 2 Plug the USB receiver into the PC USB port
STEP 3 Push the power keybutton to power on the wireless keyboard
STEP 4: Press the connection keybutton on the keyboard,the blue LED
indicator on the keyboard will flash.This indicates that the keyboard is
connecting and functioning with the receiver.If successfully to be
connected,the blue LED indicator is off,then the keyboard can work
with the PC.
NOTE:
A. If you have completed the above installation steps, but the keyboard
still does not function, the receiver and transmitter have lost
auto-recognition and must be reconnected. To re-establish the
connection, please press the connect button on the keyboard. The blue
LED on the keyboard should flash quickly and then it is off.It shows
that the keyboard is fully functional,if not please repeat the recognition
process until the receiver and keyboard are linked.
HOT KEYS GUIDE:
Following is a guide showing all the hot keys that are preset in this keyboard.
Please note mac user limitation: Multi-media hot-key functions
are not compatible. F1-f12 function keys will also function differently
between PC and MAC.
Tab
Q
W
1
2
@
A
Caps Lock
Z
Alt
Ctrl
Esc
F1
F2
Shift
OPEN
Home Search Favorite Back Forward Refresh Mail Stop Media
Play/Pause Stop Volume + - Mute Previous/Next My PC Calculator
Tab
Q
W
1
2
@
A
Caps Lock
Z
Alt
Ctrl
Esc
F1
F2
Shift
OPEN
Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Note
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver .
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Please send all request/inquiries regarding YTRUG207 wireless
keyboard to:
Juicy Couture Consumer Relations
C/O Liz Claiborne Inc.
One Claiborne Avenue
North Bergen, NJ 07047
(201) 295-2292
contactjuicy@juicycouture.com
Indicator

Summary of content (1 pages)