User's Manual

English
9
Basic Operations
TurnOn/OffthePower
1. Press the [ VOL ] knob to turn on the unit.
The unit will go back to the last source
used prior to the radio being powered off.
2. When on, press the [ VOL ] knob to
“Standby Mode” the unit.
3. When on, long press the [ VOL ] knob to
turn off the unit.
Mute
Press the [ VOL ] knob to mute the sound.
Note:
• Pressingthe[VOL]knob againor
adjustingvolumewillunmute.
AdjusttheVolume
Rotate the [ VOL ] knob to increase or
decrease the volume level.
The adjustable range of volume is 0 to 50.
PlayingSourceSelection
1. Press the [ ] button on the panel to
show main source menu.
2. Touch desired icon on the bottom of the
screen to enter corresponding working
mode, such as Disc, Navi, Radio, etc.
Drag left/right to scroll.
WhenVehicleisPutin
Reverse
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the previous source after the vehicle has
been taken out of reverse.
WhenParkingBrakeApplied
1.If'PRKSW'cableisconnectedtohand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.
2. When the car is moving forward, and a
video source is being played, the screen
will display a warning disclaimer and a
blank screen. The warning screen will
prevent the driver from watching images.
Wallpaper
1. Long press the blank area of the main
menu.
2. Select a source from:
 [Gallery]:tovisitthegalleryofmobile
storage.
[Live wallpapers]: to show the wallpapers
with animation stored in the unit. Drag up/
down to scroll.
[Wallpapers]: to show the wallpapers
stored in the unit. Drag left/right to scroll.
3. Select desired picture to view, touch [Set
wallpaper]or[OK]toconrmselection.