Caution content for VM9512 Caution content: changes or modifications not expressly approved by the party reponsible for compliance could void the user's authority to operate the equipment.
VM9512 BAND Multimedia Receiver AS DISP CLOSE Installation and Operation Manual ANGLE / TILT PICTURE Enter Press Audio VM9512 DIV ® video 240 Watts Peak Watts en Crête Vatios el Máximo 60W x 4
CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9512 Mobile Multimedia Receiver for maximum enjoyment. Preparation............................................................................................................................ 1 Installation ............................................................
ii
VM9512 PREPARATION Congratulations on your purchase of the Jensen VM9512 Mobile Multimedia Receiver. • It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9512 installed by a reputable installation shop.
VM9512 Optional Equipment Tools and Supplies • You will need these tools and supplies to install your VM9512: • • • • NAV101 The VM9512 is "navigation ready." Before accessing any navigation features, you must purchase and install the NAV101 module. All installation and operating instructions will be included with the NAV101 navigation module. Once the NAV101 is connected and operating properly, the NAV source mode will become active.
VM9512 WIRING DIAGRAM the MediaLink and Satellite Connections diagram for more information * See about connecting a satellite receiver and an iPod (through the MediaLink). MediaLink Bus SAT Radio * Satellite Receiver Connections WHITE BLUE SAT L SUB.
VM9512 To Head Unit MEDIALINK AND SATELLITE CONNECTIONS SAT Radio SAT L SAT R *SAT Cable Kit: JXMC or XMDJEN100 (sold separately) MediaLink **XM or Sirius satellite tuner (sold separately) 3.
VM9512 INSTALLATION Pre-installation 1. Press the metal levers on both sides to remove the halfsleeve from the radio. PREPARE RADIO FINAL INSTALLATION CAUTION! Be careful not to damage the car wiring. 3. 4 5 Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. 1 Wiring Complete wiring as illustrated in the wiring diagram on page 3. Once the wiring is complete, reconnect the battery negative terminal.
VM9512 ANTI-THEFT FEATURE The VM9512 is equipped with an anti-theft feature requiring the user to enter a password upon initial power on. The default user password is 012345 (6 digits). To change the anti-theft and RATINGS protection password, perform the following steps: 1. Press the SETUP button (31) on the remote control or 2. touch the button on the screen to enter the “SETUP” menu. Touch RATING to view the “RATING” sub-menu. The small "lock" icon will be “unlocked”.
VM9512 CONTROLS AND INDICATORS Button Operation 1. OPEN/CLOSE 4 3 BAND AS 7 2 1 Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. DISP With the TFT monitor open, press to cycle through information available on the TFT screen. With the TFT monitor closed, press and hold to view the clock. In DVD Mode, press to view the top and bottom information bars. Press again to turn “Display Off”.
VM9512 CONTROLS AND INDICATORS 13.Pause/Play/Enter 4 Press to pause or resume playback or to confirm current selection. 7 3 2 1 14. (right joystick) DVD/Disc Mode: Press once to enter the next chapter or track. BAND TUNER Mode: Press once to auto-search the next available radio station. Multimedia Receiver AS DISP CLOSE MENU Mode: Press once to move the cursor to the right. 15. (up joystick) DVD/Disc Mode: Press once for fast forward/fast reverse. TUNER Mode: Press to go up one frequency step.
VM9512 REMOTE CONTROL The VM9512 Remote controls both the front and rear zones. To switch from front to rear zone, move the F/R switch (32) located on the right side of the controller. 30 8 4 35 31 14 16 18 17 19 15 32 2 3 22 1 13 11 5 9 12 24 23 28 25 20 21 10 27 29 26 6 7 33 34 NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only.
VM9512 Table 1: Remote Control Functions Button Name Function Ref# DVD VCD TUNER CD/MP3 SATELLITE MENU 1 Enters the main menu of the disc Turns on/off PBC when playing VCD Displays diagnostics screen TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title Category list in CG mode iPod Displays iPod menu MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Tog
VM9512 Table 1: Remote Control Functions Button Name Function Ref# DVD VCD TUNER CD/MP3 SATELLITE iPod ||>/BAND 23 Slow Forward/Slow Reverse X2, X4, X8 Play/pause Selects AM/FM Band. Play/pause Selects SAT1, SAT2 or SAT3 band.
VM9512 USING THE TFT MONITOR Open/Close TFT Monitor Monitor Left/Right Angle Adjustment Aspect Ratio Open TFT Monitor To manually adjust the left/right angle of the TFT screen, follow these steps: Press the WIDE button (28) on the remote control or WIDE button (22) on the monitor to adjust the aspect ratio as follows (only active with video source): Press the OPEN button (1) on the front panel or press the ( ) button (25) on the remote control to activate the mechanism that moves the display panel int
VM9512 Parameter Adjustment Procedure 1. Enter Picture Quality Setting Mode: Press the PIC button (24) on the remote control or press and hold the WIDE/PICTURE button (22) on the monitor. 2. Select Item to Set: Use the up/down joystick buttons to select “BRIGHT” or “CONTRAST”. 3. Set Parameters: Use the left/right joystick buttons to modify the settings. 4.
VM9512 OPERATING INSTRUCTIONS Power On / Off Press the /SRC button (6) on the unit (or the /POWER button (4) on the remote control) to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD (7). You can also turn on the unit by pressing the OPEN button (1) and opening the TFT screen. Press and hold the button to power off the unit.The monitor is drawn back into the main compartment. AUX1, AUX2 and CAMERA.
VM9512 • PIP: Touch to view the Rear Zone, current Front Zone, or NAV screen. Use the left/right arrows below the PIP image to change the PIP source.
VM9512 MULTI-ZONE OPERATION Independent sources can be played simultaneously on the VM9512. For example, a video game console can be seen on the front screen while DVD video is available to rear passengers. Connecting the Rear Zone Touch Screen You can connect up to two additional monitors (sold separately) for rear passengers, one of which can be a Touch Screen. You can also connect a wireless headphone system to one of your rear monitors, as illustrated below.
VM9512 SETUP MENU To access system settings, press the SETUP button (31) on the remote control or touch the button on the screen to enter the “SETUP” menu. The “GENERAL” sub-menu appears highlighted in blue. 02:40 AM RADIO General RDS Rating SETUP Language Audio Clock Mode Speaker Bluetooth DivX 04 : 31 AM Hardware Video Input AUTO Beep Touch the sub-menu name or use the joystick to select a submenu (Language, Audio, RDS, etc.).
VM9512 Bluetooth Sub-menu Features Setting Options Setting Function Bluetooth On Off Disable Bluetooth function. Auto Answer On The unit automatically answers all incoming calls. Connect Manually answer calls by touching the “call” button. Manual Connect the last active mobile phone by touching the CONNECT icon when disconnected. Auto Automatically connect when your paired phone is in range. The default code is “1234”.
VM9512 Setting Camera In TFT Auto Open TFT Set Back Auto Dimmer Options Function Normal Mirror Reverse the camera image as if looking through a rear-view mirror. Auto The TFT panel automatically opens when the unit is turned on. Manual When the ignition is turned OFF, the TFT panel DOES NOT retract if it was previously out Off You must press the OPEN button (1) to open the TFT panel. Off TFT screen remains fully extended. On TFT screen moves back slightly after opening.
VM9512 TUNER OPERATION Tuner TFT Display 8 26 17 1 RADIO FM-1 4 R E A R P I P 2 24 25 3 01:02 PM P1 87.5 MHz ST E Q 10 5 LOC P1 87.5 MHz P2 90.1 MHz P3 98.1 MHz P4 106.1 MHz P5 107.9 MHz P6 102.9 MHz PTY RDS AS BAND PS: 27 1/2 MEM 6 7 9 20 14 11 Switch to Radio Tuner source 12 AS 13 PTY • 16 BAND 1/2 PS 14. : Touch to tune forward one step 15. BAND: Touch to change between AM/FM bands 16. AS: Touch to automatically store stations 17.
VM9512 close the menu). The preset number and station appears highlighted. Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button (6) to select the corresponding stored station. P1 87.5 MHz P2 90.1 MHz P3 98.1 MHz P4 106.1 MHz P5 107.9 MHz P6 102.9 MHz Auto Store (AS) To select six strong stations and store them in the current band: 1. 2. Select a band (if needed).
VM9512 SATELLITE RADIO OPERATION Listeners can subscribe to XM® Radio on the Web by visiting www.xmradio.com, or by calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the Identification (ID) Code”). Customers can receive a limited number of free-to-air channels without activation. Listeners can subscribe to Sirius® Radio on the Web by visiting www.sirius.com, or by calling (888) 539-SIRIUS.
VM9512 SAT E Q R E A R SAT1 XM Preview 01:02 CH001 Preview ######## 001 XM Preview CH 004 The 40s P I P 005 The 50s CG 006 The 60s CAT 007 The 70s Title: www.xmradio.com • • • • • SCN MEM DIAG While in Search Mode, to switch between Channel and Category search modes, press the CH or CAT buttons on the touch screen. Use the scroll bar and arrows on the touch screen to view the next/previous page of stations. Each page contains six channels to select from.
VM9512 DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally. Controlling Playback Repeat Playback To access the on-screen controls, touch the screen.
VM9512 Press the TITLE button (2) on the remote control or on screen to select a different title for playback. Press the ENTER (joystick) button to confirm your selection and begin playback. You can also select a title using the touch screen. Moving Through Chapters Enter the desired title, chapter/track, or time using the onscreen number pad and then press the Enter button. To exit the screen without making a selection, touch Exit. To clear your entry and start over, touch Clear.
VM9512 General Disc Information Table 5: Disc Properties Symb ol 12cm Disc Properties Max Play Time Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) (MPEG 2 Method) 133 minutes 242 minutes 266 minutes 484 minutes Single side single layer (VCD) (MPEG 1 Method) 74 minutes Single side single layer 74 minutes Table 6: Disc Symbols Symbol Meaning Number of voice languages recorded.
VM9512 DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. The VM9512 will play music or other audio files from the following disc media: • • • • • CD-DA CD-R/RW DVD DVD+R/RW DVD-R/RW Upon inserting a disc with the TFT screen open, the disc and track title (if available), along with the track number and playing time appear on the screen.
VM9512 Direct Track Entry To select a track directly, touch the display the direct entry menu. button on screen to TRACK: _ _ / ## 1 2 3 4 5 6 7 8 9 Exit 0 Clear Enter the desired track number using the on-screen number pad, and then press the Enter button. To exit the screen without making a selection, touch Exit. To clear your entry and start over, touch Clear.
VM9512 MP3/WMA OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics. MP3/WMA Media and File Requirements This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted using the full method and not the quick method to prevent illegal disc operation.
VM9512 MP3 User Interface The on-screen indicators and touch key areas for MP3 playback are outlined below. 17 16 DISC E Q R E A R P I P 1 2 3 4 5 6 20 2 1 18 14 3 01:02 AM (Root) MP3 4/84 00:00:23 15 Cherry Poppin Da Chris Isaak - Baby Crazy Town - Butt Phish - Birds Of A Phish - Bouncin' R Phish - Freebird (L 10 8 9 5 Controlling MP3/WMA Disc Playback Playing MP3/WMA Files 6 1/2 4 17. Touch to view the SOURCE MENU and select a new playback source 18. Folder name 19.
VM9512 iPod OPERATION iPod User Interface front panel or remote control (8) until the iPod menu appears on the screen. The on-screen indicators and touch key areas for iPod playback are outlined below.
VM9512 BLUETOOTH OPERATION About Bluetooth Bluetooth is a short-range wireless radio connectivity technology that is developed as a cable replacement for mobile phones, handheld PCs and other devices. Bluetooth operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp.
VM9512 Pairing the Bluetooth System with Your Mobile Phone and Head Unit Answering an Incoming Call 1. For best reception, speak loudly and clearly. The microphone is located on the left side of the unit. 2. Press the button (8) to initiate the pairing process. Keep the mobile phone within 2 meters of the head unit when pairing. (To terminate the pairing process, press To answer the call, touch the the button again.
VM9512 Phone Book 1. Touch the Phone Book menu option to display the phone book stored on your mobile phone, if compatible. The screen will display “Ready...” while the phone book is downloading. 2. Once the download is completed, you can use the arrow buttons and scroll bar on the right side of the window to navigate the list. Since the unit downloads one page of entries at a time, there may be a slight delay while the next page of numbers is downloaded. 3.
VM9512 TROUBLESHOOTING Table 7: Troubleshooting Problem Cause Corrective Action GENERAL Unit will not power on Remote control does not function No/low audio output Poor sound quality or distortion Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right corner of the front panel Battery depleted Replace battery with new one Battery installed incorrectly Remove batter
VM9512 Table 7: Troubleshooting Problem Disc does not play back Cause Corrective Action Disc is warped or scratched Use disc in good condition Disc is dirty or wet Clean disc with soft cloth Laser pickup is dirty Clean laser pickup with cleaning disc Incompatible disc is used Use compatible disc Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction Disc region code is not compatible with unit Use disc with proper region code Disc is inserted upside
VM9512 Care and Maintenance 1. 2. 3. 4. 5. 6. 7. 8. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and nonneutral detergent (such as alcohol) may result in scratching or discoloration. Do not get water or cleaning fluids on the unit. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again.
VM9512 SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, AVI, MPEG1 / 2, XviD, DivX and Kodak picture CD (JPEG).
Limited Warranty DO NOT RETURN THIS PRODUCT TO THE STORE CD or Multimedia Radios/Headunits Audiovox Electronics Corporation (“the Company”) is committed to quality and customer service, and are pleased to offer you this Warranty. Please read it thoroughly and contact the Company at 1-800323-4815 with any questions. Who is covered? The Company extends this warranty to the original retail purchaser of products purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or Canada.
Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensen.com © 2007 Audiovox Ver.