User's Manual

English
11
M606
SiriusXM Satellite Radio Operations
3. For unlocking the locked channel, tune
to the channel you wish to unlock, press
and hold [DISP] and press [ ] to select
“UNLOCKCH”. Enter the password to
unlock the channel.
4. To access the locked channels, select a
channel by “DIRECT SELECT”.
Press [MENU] and select “DIRECT
SELECT” by pressing the [ENT] button.
Input the desired locked channel (you
need to input 3 digits) and enter the pass-
word, then you can tune into that locked
channel.
This unit can playback MP3/WMA
les
Note:
• Ifyouplaya WMA filewithactive DRM
(DigitalRightsManagement),therewillbe
no audio.
To disable DRM
(Digital Rights Management)
When using Windows Media Player 9/10/11,
click on Tool -> Options -> Copy Music tab,
then under Copy settings, unclick the Check
box for Copy protect music. Then, recon-
struct les.
Personally constructed WMA les are used
at your own responsibility.
Precautions when creating MP3/
WMA le
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate
8 kbps-320 kbps / VBR
2. WMA: Bit rate 8 kbps-320 kbps
File extensions
1. Always add a file extension “.MP3”,
“.WMA” to MP3, WMA le by using single
byte letters. If you add a file extension
other than specified or forget to add the
le extension, the le cannot be played.
2. Files without MP3/WMA data will not play.
The les will not play if you attempt to play
les without MP3/WMA data.
* When VBR les are played, the displayed
play time may differ from the actual play
location.
1. Insert a USB device into the rear of the
unit USB cable.
When connecting a USB device, the unit
will read the les automatically.
2. To remove the USB device, you should
rst select another source or turn off the
power, in order to avoid damaging the
USB device. Then you can remove the
USB device safely.
USB Operations
SiriusXM Satellite Radio Operations
can see channel name, channel number,
artist, title or content by pressing [DISP].
4. Press [ENT] to tune to selected channel.
Note:
If no operation is performed for 10 seconds,
the Category Browsing mode is canceled.
Preset scan
Preset scan receives the channels stored
in preset memory in order. This function is
useful when searching for a desired channel
in memory.
1. Press and hold the [PS/AS] button.
2. When a desired channel is tuned in, press
the [PS/AS] button again to select that
channel.
Category scan
This function is useful when scanning for a
desired channel within a specic category.
1. Press the [BND] button on the panel.
Selectable options CHN/CAT will appear.
2. Short Press [PS/AS] button to begin
channel scan.
3. When the desired channel is playing,
press the [PS/AS] button again to select
that channel.
Note:
• Be careful not to press and hold the
[PS/AS] button for 1 second or longer,
otherwise the preset scan function will
begin and the unit starts scanning presets.
Instant Replay
1. In SiriusXM mode, press [MENU] button to
enter INSTANT REPLAY mode.
2. Press [ ] or [ ] button to skip back
or forward.
3. Press and hold [ ] or [ ] button to
rewind (REW) or fast forward (FF).
4. Press the [ 4 ] button on the panel or [ ]
on the remote control for play/pause.
5. Press [MENU] or [ BND ] button to exit.
Changing the Display
Text information, such as the channel name,
artist name/feature, song/program title and
content is available with each SiriusXM
channel. The unit can display this text informa-
tion as explained below.
1. In SiriusXM mode, press [DISP] button.
Each time you press this button, the display
changes as shown below.
Band/Channel number/channel name =>
Artist Name => Song Title=> Content Info
=> Category Name => Clock => Band/
Channel number/channel name
* If there is no text information, nothing will be
displayed.
Parental Lock / Unlock
The SiriusXM Parental Control feature allows
you to control access to channels that you con-
sider inappropriate for younger listeners.
When enabled, the Parental Control feature
requires you to enter a password to tune into
the locked channels. Information on setting up
the password, setting up the channels to be
locked, and the method to access the locked
channels is described below.
1. To set up the password, press and hold [DISP]
then release [DISP] and press [ ] to
scroll to “PARENTAL PASSWORD”. Press
[ENT] button to change password. Enter
old password, then enter new password. To
enter password, rotate [UP/DOWN] knob to
choose the numbers (0-9) and press [ ]
or [ ] to enter the next number in the
password. Once all 4 numbers are entered,
press [ENT] button to confirm password.
Note:
Original password is “0000”.
2. To set up the channels to be locked, tune
to the channel you wish to lock. Press
and hold [DISP] then release [DISP] and
press [ ] to scroll to “LOCK CH”, press
[ENT] button to conrm. Input password as
explained in step 1 and then press [ENT]
button to set the locked channel. You will be
asked to input password. Enter password
and “LOCK” will be displayed if it is suc-
cessful.