User's Manual

Adjusting the Fader and Balance

The user can adjust front/rear fader settings, L/R balance settings, and subwoofer

levels here.

1. Enter the EQ setup mode.

2. Touch the [ ] icon in the EQ interface menu.

Balance- This feature is used to balance the audio output levels between the left

and right side of the vehicle. Touch the t or u icons to change the balance control

settings -12 (Left) to +12 (Right). The setting can also be changed by touching

screen within the grid to move the blue sphere.

Fader- This feature is used to fade the audio output levels between the front

and rear of the vehicle. Touch the p or q icons to change the fade control

settings -12 (Rear) to +12 (Front). The setting can also be changed by touching

screen within the grid to move the blue sphere.

Sub (Subwoofer)- This feature is used to reduce or increase the subwoofer

sound level. Touch the slide bar t or u icons to adjust the subwoofer volume from

-12 to +12. This setting will vary depending on the input level setting of your

subwoofer amplifier.

To exit the balance-fader touch the return icon on the top left corner of the screen.

Figure 19. Fade-Balance Adjustment Screen

NOTE:

•

The EQ mode will change to ‘User’ automatically when you adjust the frequency

value in all modes besides ‘User’.

VX3012