User's Manual
Table Of Contents
- FEATURES
- CONTROLS AND INDICATORS
- REMOTE CONTROL
- USING THE TFT MONITOR
- EXTERNAL DEVICES
- QUICK START GUIDE
- EQUALIZER CONTROL MENU
- SYSTEM SETTINGS
- DISC OPERATION
- RADIO TUNER OPERATION
- USB OPERATION
- iPod®/iPhone® OPERATION
- AV-In1/AV-In2 OPERATION
- BLUETOOTH OPERATION
- NAVIGATION QUICK START GUIDE
- REAR CAMERA OPERATION
- STEERING WHEEL CONTROLS (SWC) OPERATION
- PANDORA RADIO OPERATION
- SiriusXM® RADIO OPERATION
- CARE AND MAINTENANCE
- SPECIFICATIONS
- NOTES
10
VX7014
REMOTE CONTROL
Remote Control Notes
1. Aim the remote control at the remote sensor on the unit.
2. Remove the battery or insert a battery insulator if the remote control will not
be used for a month or longer.
3. Do not store the remote control in direct sunlight or in a high temperature
environment. It may not function properly.
4. Under normal operation conditions, battery life is approximately 6 months. If
the remote control does not work, replace the battery.
5. Use button-shaped CR2025 lithium batteries only.
6. Do not recharge or disassemble the battery.
7. Do not heat the battery or expose the battery to re.
8. To avoid risk of accident, store the battery in a place that children can not
reach.
Battery Installation/Removal
1. Slide out the battery compartment cover located on the bottom of the back
of the remote control.
2. Insert a CR2025 lithium battery into the battery tray. Make sure that the
proper polarity (+ or -) is observed.
3. Align the cover tabs with the remote control and slide the cover in until it
locks.
Slide Out
Slide In
Battery Compartment Cover Removal/Installation