User's Manual
Table Of Contents
- FEATURES
- CONTROLS AND INDICATORS
- REMOTE CONTROL
- USING THE TFT MONITOR
- EXTERNAL DEVICES
- QUICK START GUIDE
- EQUALIZER CONTROL MENU
- SYSTEM SETTINGS
- DISC OPERATION
- RADIO TUNER OPERATION
- USB OPERATION
- iPod®/iPhone® OPERATION
- AV-In1/AV-In2 OPERATION
- BLUETOOTH OPERATION
- NAVIGATION QUICK START GUIDE
- REAR CAMERA OPERATION
- STEERING WHEEL CONTROLS (SWC) OPERATION
- PANDORA RADIO OPERATION
- SiriusXM® RADIO OPERATION
- CARE AND MAINTENANCE
- SPECIFICATIONS
- NOTES
19
VX7014
System Settings Adjustment
To access and adjust system settings:
1. Touch the Settings (
) icon on the Main Menu screen to enter the SETTINGS
MENU. Sub-menus where adjustments can be made will be highlighted. (See
”SYSTEM SETTINGS” on page 23.)
Volume Adjustment
To increase or decrease the volume level, rotate the front panel Rotary
Volume ( ) knob / Mute button. The unit’s front panel screen will display the
volume level for 3 seconds. The volume level ranges from 0 to 50 (a beep sounds,
indicating that the adjustment limit has been reached).
Audible Beep Conrmation
An audible beep tone conrms each function selection. The beep tone can be
disabled through the Setup menu. (See “General Sub-menu Features” on page
23.)
Muting the Audio
Press the front panel Rotary Volume ( ) knob / Mute button to mute the audio
from the unit. Mute icon is displayed on the LCD screen. Press the Rotary
Volume ( ) knob / Mute button again to restore the audio volume to its
previous level. Adjusting the volume or using any of the audio setup features
cancels the mute function.
Equalizer Controls
Equalizer (EQ): Adjustment can be made after entering one of the audio/video
sources (Disc, Radio, USB, AV-IN or SXM).
Touch the Equalizer (EQ) icon to view the Equalizer Control Screen to select a
desired preset setting (Optimal, Classic, Rock, Jazz, Techno or Pop), Flat setting,
custom User setting, make adjustments to the audio Balance and Fade levels or to
turn the Loudness option ON or OFF. Touch the SRC icon to return to the current
source. (See ”Adjusting Equalizer Controls” on page 21.)