User Guide

The module provides a complete solution for a high-performance integrated wireless and
Bluetooth device. It support 2-stream 802.11ac solutions with Multi-user MIMO (Multiple-Input,
Multiple-Output) with Wireless LAN(WLAN) USB2.0 network interface controller. It provides
USB2.0 multi-function interface for Wi-Fi and Bluetooth. The module complies with IEEE 802.11
a/b/g/n/ac 2T2R MIMO standard, and Maximum PHY data rate up to 173.3 Mbps using 20 MHz
bandwidth, 400 Mbps using 40 MHz bandwidth, and 866.7 Mbps using 80 MHz bandwidth.
The module MAC supports 802.11e for multimedia applications, 802.11i and WAPI for
security, and 802.11n/802.11ac for enhanced MAC protocol efficiency.
Supports 802.11ac 2x2, Wave-2 compliant with MU-MIMO
Completes 802.11n MIMO solution for 2.4GHz and 5GHz band
Maximum PHY data rate up to 173.3Mbps using 20MHz bandwidth, 400Mbps using 40
MHz bandwidth, and 866.7Mbps using 80MHz bandwidth
Backward compatible with 802.11a/b/g devices while operating at 802.11n data rates
Backward compatible with 802.11a/n devices while operating at 802.11ac data rates
Complies with USB2.0 for WLAN and BT controller
USB Multi-Function for both BT (USB function 0) and WLAN (USB function 1)
USB Selective Suspend supported
IEEE 802.11a/b/g/n/ac compatible WLAN
IEEE 802.11e QoS Enhancement(WMM)
IEEE 802.11i (WPA, WPA2). Open, shared key and pair-wise key authentication services
IEEE 802.11h DFS, TPC, Spectrum Measurement
IEEE 802.11k Radio Resource Measurement
WAPI (Wireless Authentication Privacy Infrastructure) certified
Channel management and co-existence
Wi-Fi Direct supports wireless peer to peer
Support Wake-On-WLAN via Magic Packet and wake-up frame