User's Manual

2 3 4 5 6
B L U E TO O T H
®
C O L O R
H E A D P H O N E S
User’s Guide
3301732,3301733,3301734
The Bluetooth
®
word mark and logos are owned by Bluetooth SIG,
Inc. and any use of such marks by General Wireless Operations Inc.
is under license.
Complies with the European Union’s
“Restriction of Hazardous Substances
Directive,” which protects the
environment by restricting specic
hazardous materials and products.
© 2016 General Wireless Operations Inc.
All rights reserved. AUVIO is a registered
trademark used under license by General
Wireless Operations Inc. dba RadioShack.
05A16
3301732
3301733
3301734
Printed
in China
www.radioshack.com
We hope you enjoy your Bluetooth Color Headphones. With
convenient controls on earcups, the headphones provide an
elevated audio experience and supreme sound quality with
noise isolating design. Please read this user's guide before
using your headphones.
Package Contents
• Headphones
• USB Charging Cable
• 3.5mm Audio Cable
• Use's Guide
Charge Your Headphones
\When the LED Indicator ashes red or has no response,
charge your headset.
• Normal charging takes about 1.5 hours.
• Provides up to 12 hours of play time and up to 100 hours
standby.
1. Connect the supplied charging cable to the USB source
and to the micro USB charging port. The LED Indicator
lights red when charging and turns o when fully
charged.
2. Unplug the charging cable when the headphones are
fully charged.
Pairing
1. Press and hold ► for 5 seconds to turn on. LED
Indicator ashes pink and then blue quickly.
2. Press and hold ► for 3 seconds to start pairing. LED
Indicator ashes blue and red.
3. On your device, turn on the Bluetooth function, and set
it to search for Bluetooth devices.
4. Select AUVIO BTCHP from the list of found devices.
5. When paired, the LED Indicator ashes blue slowly.
Note: If the headphones are not paired within 3 minutes, they
turn o automatically.
Using the headphones
To turn the headset on/o, press and hold ► for 5 seconds.
On: LED Indicator ashes pink and then blue quickly.
O: LED Indicator ashes pink and then turns o.
To Button Press
Turn on headphones
►
..and hold for
5 sec.
Turn o headphones ..and hold for
5 sec.
Start Bluetooth pairing
►
..and hold for
3 sec.
Clear Bluetooth pairing ..and hold for
3 sec.
Play/Pause × 1
Answer/end call × 1
Reject an incoming call × 2
Last-number redial
Go to next/previous track Vol +/- ..and hold for
3 sec.
Clear Bluetooth Pairing
Your headphones automatically reconnect to the most
recently paired device when switched on.
If you want to clear the Bluetooth memory, change to other
Bluetooth devices, or in case of problems with pairing, do the
following:
1. Press ► and hold for 3 seconds.
2. The headphones beep to conrm disconnection. LED
Indicator turns from ashing blue slowly to rapidly
ashing blue and red.
3. When you switch on the headphones next time, the
headphones no longer pair automatically.
Wired Mode
• Use the 3.5mm Audio Cable to connect to your
headphones's audio jack. Make sure the headphones are
switched o to save power. A handy option when your
headphone battery power is depleted.
Specifications
Battery charge time ..........................................................................1.5 hours
Operation time ....................................................................................12 hours
Standby time ..................................................................................... 100 hours
Battery charging voltage ......................................................................5VDC
Charging current .................................................................................. 400 mA
Bluetooth protocol ..................................................................................... V4.0
Operating distance ...................................................................... 33 ft. (10m)
Frequency response ..........................................20Hz - 20KHz (speakers)
............................................................................................. 100Hz-10KHz (mic)
Sensitivity .................................................... 113dB (speakers), -42dB (mic)
Impedance ........................................................................................... 32 Ohms
Charging Cable length ........................................................... 1.5 ft. (0.45m)
Audio Cable length .....................................................................3.9 ft. (1.2m)
Specications are subject to change and improvement without notice.
Actual product may vary from the images found in this document.
FCC Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop
using your radio. Changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
90-Day Limited Warranty
Go to www.radioshack.com/help for details.
RadioShack Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102
►
Vol+
LED
Indicator
Vol -
Microphone
USB
Charging
port
Audio jack