Manualshelf

Safety Instructions

ManualsBrandsHuizhou Yinghai Digital Electronics ManualsElectronicsBluetooth Stereo Boombox with CD/ Cassette Player-Recorder/AM-FM Radio
10111213141516171819
auxiliary device as usual.
6. Press and hold the POWER BUTTON (#1) to turn off the unit.
Notes:
If you connected the Line-out Jack of your external device then you only need to
adjust the volume control of this system. If you connected the Headphone Jack of
your external device then you may need to adjust both the volume control of your
external device and the volume control of this system to find the most desirable
volume setting.
Remove the audio cable from AUX IN JACK (#18) when you finish listening. Don't
forget to switch off the power on your external device as well.
TAPE OPERATION
Playing a tape
1. Press and hold the POWER BUTTON (#1) to turn on the unit.
2. Tap the FUNCTION BUTTON (#17) repeatedly to select cassette mode.
3. Press STOP/ EJECT BUTTON (#8) to open the CASSETTE HOLDER (#24).
4. Insert a tape and close the CASSETTE HOLDER (#24).
5. Press CASSETTE PLAYBUTTON (#11) to start playback.
6. Tap the VOLUME -/+ BUTTONS (#15/16) repeatedly to the desired volume level.
7. To pause playback, press the CASSETTE PAUSE BUTTON (#7). Press the
CASSETTE PAUSE BUTTON (#7) again to resume playback.
8. To stop playback, press CASSETTE STOP/ EJECT BUTTON (#8).
9. To search backward or forward, press REW. BUTTON or F.FWD BUTTON
(#10 or #9) and press CASSETTE PLAY BUTTON (#11) or CASSETTE
STOP/ EJECT BUTTON (#8) at the point you want stop.
Recording from CD/FM/AM/BT/AUX
1. Press and hold the POWER BUTTON (#1) to turn on the unit.
2. Press CASSETTE STOP/EJECT BUTTON (#8) to open the CASSETTE
HOLDER (#24).
3. Insert a tape and close the CASSETTE HOLDER (#24).
4. Tap the FUNCTION BUTTON (#17) repeatedly to select CD, FM, AM, Bluetooth
or AUX mode which you want to record.
In CD mode, start to playback the CD.
In radio (FM or AM) mode, tune to your desired radio station.
In Bluetooth mode, start playback from your Bluetooth device.
In AUX mode, start playback from your auxiliary source.
5. Press CASSETTE RECORD BUTTON (#12). CASSETTE PLAYBUTTON
(#11) is depressed automatically.
6. To pause recording, press CASSETTE PAUSE BUTTON (#7). Press the
CASSETTE PAUSE BUTTON (#7) again to resume recording.
7. To stop recording, press CASSETTE STOP/EJECT BUTTON (#8).
8. To listen to your recording, tap the FUNCTION BUTTON (#17) repeatedly to
select cassette mode. Press REW. BUTTON (#10) to rewind the tape to
search your recording, then press PLAYBUTTON (#11) to listen.