Instructions / Assembly

Bulbs
(not included)
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS INSTALLATION
STEP 1
Unscrew the ball nuts from the mounting unit.
Use the mounting screws to attach the mounting unit
to the junction box (not included).
Mounting Unit
Mounting Screws
Junction Box (not included)
Wire Nuts
Fixture
Fixture
Mounting Unit Mounting Screws Wire NutsBall Nuts
Ball Nuts
Glass shade
Glass shade
STEP 2
Wire
strippers
Ladder
Safety
glasses
Electrical
tape
Phillips
screwdriver
Flat blade
screwdriver
Pliers
CAUTION
◆ Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have
resulted during shipping. If there is a defect
in the wire, do not attempt installation.
◆ Before starting installation of this fixture or
removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by
removing the fuse at the fuse box.
If you need further assistance, please contact us by Email: [e-mail]
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED
HARDWARE INCLUDED
@
White wire from
the fixture
Ground wire from
the Fixture
Black wire from
the fixture
Bare or Green ground wire
from the junction box
*Green Ground Screw
Black or Red wire
(live wire)
from the junction box
White wire
(neutral wire)
from the junction box
*Sealing tape
(not included)
Make the electrical connection from the junction box (not included) to the
fixture. Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Next, connect the live wire, neutral wire and ground wires
with the supplied wire nuts. Secure with electrical tape.
Socket Ring
Socket