Instructions / Assembly

Bulbs
(not included)
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS INSTALLATION
STEP 1
1.
2.
3.
1. Installation fixture.
2. Attach the iron rack onto fixture using ball nuts (B).
STEP 2
1. Unscrew the ball nuts (A) and
green grounding screw from
the mounting unit.
2. Disassemble the swivels under
the ceiling plate by unscrewing
decorative nuts. Keep the
baseplate, washers, ground wire
and lanyards for latar use.
Fixture
Fixture Iron Rack
Iron Rack
Ball Nuts
(A&B)
Ball Nuts (B)
Ball Nuts (A)
Stem
Stems Swivels
Swivels
Ceiling Plate
Ceiling Plate
Mounting
Screws
Mounting Screws
Wire Nuts
Wire Nuts
Washers
Washers
Ground
Wire
Ground
Wire
Mounting Unit
Mounting Unit
Baseplate
Baseplate
Lanyards
Lanyards
Decorative
Nuts
Decorative
Nuts
Wood
Screws
Wood Screws
Wall
Anchors
Wall Anchors
Stem
Stem
Stem
Junction Box
(not included)
Wire
strippers
Ladder
Safety
glasses
Electrical
tape
Phillips
screwdriver
Flat blade
screwdriver
Pliers
CAUTION
◆ Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have
resulted during shipping. If there is a defect
in the wire, do not attempt installation.
◆ Before starting installation of this fixture or
removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by
removing the fuse at the fuse box.
If you need further assistance, please contact us by Email: [e-mail]
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED
HARDWARE INCLUDED
@