Instructions / Assembly

1. Weave the fixture wire and fixture ground wire
through the stems and swivels.
2. Install swivels and stems into the fixture.
Install stems based on the desired length of
the item on the fixture.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 7
STEP 3
1. Attach the lanyards on to the mounting unit.
2. Make the electrical connection from the junction box (not included) to the
fixture. Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Then, connect the positive, negative and ground wires with
the supplied wire nuts. Secure with electrical tape.
STEP 6
1. Weave the fixture wire and
fixture ground wire through
the ceiling plate, baseplate,
ground wire, lanyards,
washers and decorative nuts.
2. Install baseplate, lanyards,
ground wire and swivels into
the ceiling plate, and secure
with washer and decorative nuts.
STEP 4
Attach the mounting unit to
the junction box (not included)
using the mounting screws.
Secure mounting unit to
ceiling with wood screws
and wall anchors.
STEP 5
Attach the ceiling plate to the mounting unit through
screw holes as shown, and secure it with ball nuts (A).
STEP 8
Install bulbs (not included)
1
2
White wire from
the fixture
Ground wire from
the Fixture
Black wire from
the fixture
Black or Red wire (hot)
from the junction box
White wire (neutral)
from the junction box
Bare or Green ground wire
from the junction box
*Green Ground Screw
*Sealing tape
(not included)