Instructions / Assembly
Rack pillars & Wings Assembly
STEP3
1. On the T-type connector, the part with the red switch and the
‘top’ lettering faces the front.
2. Push the wings in the direction of the arrow, to connect them to
both sides of T-type connectors until you hear a ‘click’.
3. Place the wing horizontally and push it to the inside of the T-type
connector to lock it.
Hulife Home Laundry Rack Explore Manual
Precautions
Do not put fingers into the opening of the pipe
Keep your children away from the laundry rack when assembling,
using and storing it.
Please read before assembling the components and using the product
Components
1. Square pipe 1ea
2. Candle type Pipes 2ea
3. Straight pipes 2ea
4. Multipurpose pipe 1ea
5. T-type connectors 6ea
6. Side wings 2ea
7. Wheels 6ea
8. Legs 2ea
9. Elbows 2ea
10. Wing racks 6ea
STEP1
Rack Leg Assembly
1. Connect the wheels to each leg.
2. Connect the square pipe to legs.
3. Push the square pipe to both legs until you hear a ‘click’.
Rack Wing Shelf SET Assembly
STEP2
1. Connect Candle pipes to the legs.
2. Connect Straight pipes to Candle pipes .
Rack pillars Assembly
STEP4
l l
1. As shown in the picture, fix the side wings to each
pillar.
Side Wings Assembly
STEP5
STEP6
Multipurpose pipe set assembly
1. Plug the elbows into both sides of the multipurpose
bar and then plug it into the top of the rack.
STEP5
Refer to the steps
Laundry Rack Assembly Complete
Completion
1. Ensure the ‘top’ lettering and the red switch points
upward (Unlock) properly on the T-type connector
before connecting to the pillars.
2. Push the wings downward to connect them to the
pillars.
3. Adjust the height using the T-type connector.
4. Push the red switch downwards to lock the position
and repeat for other wings.
Imported & Distributed by: Mungsube Enterprise Inc. 19 Spielman Rd, Fairfield, NJ 07004
www.hulife-home.com
1-888-702-0009
cs@hulife-home.com hulifehome
►