HU6677B_Instruction_Sheet

ManualsBrandsHulk 4X4 ManualsCaravan Battery & ElectricalLCD Battery Meter

LCD BATTERY METER

INSTRUCTION SHEET

OVERVIEW

This document describes how to use and the

specifications of the LCD BATTERY METER (HU6677B).

This meter can be used to test all kinds of battery types,

including voltage, discharge current, discharge power,

discharge impedance, internal resistance, capacity, dump

energy, energy consumption and running time, and display

the measurement data through LCD screen.

Measuring Range is 300A (needs to be used with 300amp

external shunt provided).

1. FUNCTION DESCRIPTION

1.1 Voltage

1.1.1 Measuring range: 0-200V. (when the test voltage is

<8V, please use the independent power supply mode)

1.1.2 Display format: <10V display as: 9.99V

<100V display as: 99.9V

≥100V display as: 199V

1.1.3 Minimum resolution:0.01V

1.1.4 The starting test voltage: 0.05V

1.1.5 Measurement accuracy:1%

1.2 Current

Measuring range: 0-300A using the supplied shunt.

Default setting is 100A.

1.2.1 Display format: <1A display as: 999mA

<10A display as: 9.99A

<100A display as: 99.9A

≥100A display as: 199A

1.2.2 Minimum resolution: 1mA

1.2.3 The starting test current: 20mA

1.2.4 Measurement accuracy:1%

1.3 Power

1.3.1 Measuring range: 0-60000W.

1.3.2 Display format: <10W display as: 9.99W

<100W display as: 99.9W

<1000W display as: 999W

<10000W display as: 9.99kW

≥10000W display as: 19.9kw

1.3.3 Minimum resolution: 0.01W

1.3.4 The starting test power: 0.2W

1.3.5 Measurement accuracy:1%

1.4 Impedance

(Impedance=Voltage/ Current)

1.4.1 Measuring range: 0-1000Ω

1.4.2 Display format: <100Ω display as: 99.9Ω

≥100Ω display as: 999Ω

When over the test range or the current is zero, it

display “---”

1.4.3 Minimum resolution: 0.1Ω

1.4.4 Measurement accuracy:1%

1.5 Internal Resistance

Internal resistance= (Full voltage – Bring load voltage) /

Bring load current, when the bring load voltage is larger

than the maximum voltage, the internal resistance

is zero.

1.5.1 Measuring range: 0-999mΩ

1.5.2 Display format: 999mΩ, when over the test range or

the current is zero, it display “---”.

1.5.3 Minimum resolution: 1mΩ

1.5.4 Measurement accuracy:1%

Note: Before you test the internal resistance, you should

preset the full voltage depending on the battery type, after

it is fully charged you can use it to test; if you do not fully

charge it, you can set the battery without load voltage is

the full voltage, then test; the internal resistance is not a

ﬁxed value, the more the battery discharged, the bigger

the resistance.

1.6 Capacity

1.6.1 Measuring range: 0-1000AH

1.6.2 Display format: <1AH display as: 999mAH

<10AH display as: 9.99AH

<100AH display as: 99.9AH

<1000AH display as: 999AH

1.6.3 Minimum resolution: 1mAH

1.6.4 Measurement accuracy:1%

Note: Battery capacity testing is a cumulative process of

discharge current versus time, it needs some time, the

time is dependent on the discharge current; before you

test the capacity, you should preset the full voltage and

the cut-off voltage depend on the battery type, after it is

fully charged you can use it to the discharge test; When

the dump energy display blank, it means the discharge is

over, this capacity display value is the batteries capacity.

1.7 Dump energy

Dump energy is display via the battery symbol, totally

10 grids, every grid presents 10% energy.

Dump energy is calculated via the current battery voltage

value, before test you should preset the full voltage

and the cut-off voltage depending on the battery type;

every grid voltage = (the highest voltage – the lowest

voltage) / 10.

1.8 Accumulate energy consumption

1.8.1 Measuring range: 0~9999kWh

1.8.2 Display format: <1kWh display as: 999Wh

<10kWh display as: 9.99kWh

<100kWh display as: 99.99kWh

<1000kWh display as: 999.99kWh

≥1000kWh display as: 9999kWh

Over the test range will become zero.

1.8.3 Minimum resolution: 1Wh

1.8.4 Measurement accuracy:1%

Note: 1Wh=0.001kWh=0.001 Kilowatt

1.9 Running time

1.9.1 Measuring range: 0 ~ 999 hour (without load the time

will not accumulate)

1.9.2 Display format: 0:00:00 ~ 999:59:59

Over the test range will become zero.

HU6677B

Summary of content (4 pages)

PAGE 1
LCD BATTERY METER HU6677B INSTRUCTION SHEET OVERVIEW 1.5.1 Measuring range: 0-999mΩ 1.5.2 Display format: 999mΩ, when over the test range or the current is zero, it display “---”. 1.5.3 Minimum resolution: 1mΩ 1.5.4 Measurement accuracy:1% This document describes how to use and the specifications of the LCD BATTERY METER (HU6677B).
PAGE 2
. OPERATING INSTRUCTIONS 2.1 Setting the full and cut-off voltage Figure 1: The normal display interface Figure 2: The voltage setting interface Step 2: At this time, the battery symbol shows the zerogrid to indicate the cut-off voltage setting state, the default cut-off voltage is 016.0V, the setting method is the same as above; the cut-off voltage is 0.8 times of the full voltage by default, after setting the full voltage, the cut-off voltage is automatically generated in the relationship of 0.
PAGE 3
2.3 Clear the Energy Figure 9: Clear the energy interface Step 1: In the normal display interface, long press of the button until the LCD shows the interface of Figure 2, then release the button, short press of the button again will switch to the interface to Figure 9, it indicates that this state is the clearing energy setting state. Step 2: Longer press of the button until the data has been cleared and exit the setting status, restore the normal display interface. 2.
PAGE 4
5. WIRING DIAGRAM 6.DIMENSIONS FIGURE (MM) Manufactured for Automotive Imports Pty Ltd 22-28 Lexton Road, Box Hill, Victoria, Australia Made in China www.hulk4x4.com.au www.hulk4x4.co.