User's Manual

Q. What is ECO MODE and how does it work?
A. Its main purpose is to conserve battery by shutting off the display and allowing the monitor unit to
“wake up” from ECO mode when noise is detected near the camera unit.
Entering ECO mode: Select the duration before entering ECO mode. (section 4.10) Within this period,
the system will start its timer to detect noise from camera unit. If noise is detected, the timer will
restart. If there is no noise during this period, the monitor unit will enter ECO mode.
Leaving ECO mode: To manually force the system to leave ECO mode, press any button on the monitor
unit. If the camera unit detects noise, the system will leave ECO mode automatically. The sensitivity
of noise detection can be adjusted in Camera Properties Menu (section 4.14). A high sensitivity setting
means the VOX will be triggered at lower sound level. A low sensitivity setting means the VOX will be
triggered at a higher sound level.
Q. Why does the sound cut in and out all the time?
A. This is likely caused by the Auto Mute function. Auto Mute function is designed to eliminate white
noise (background noise) when the detected sound level is low. It will shut down the speaker when
10 seconds of continuous silence is reached. If the environment is at marginal sound level, it may lead
to the sound cutting in and out. To remedy this, disable the Auto Mute function as described in section
4.10 of this manual.
Q. Why does the system emit a beeping sound with a high or low temperature warning?
A. Both the beeping sound and temperature warning are the alerts for a high/low temperature warning.
This warning is displayed when the camera detects a room temperature that is either above or below
the desired temperature level range.
You can enable or disable the temperature warning sound as described in section 4.8 of this
user manual.
Q. Why can I not hear the environmental sound when a lullaby is playing?
A. Because the speaker and microphone are placed in the same device, and their relative distance is
much shorter when compared to the environmental sound sources, the music will cover all
environmental sounds during lullaby playback.
You may select different playback modes (1 min., 10 min., 30 min., or Stay On) as mentioned in section
4.14 of this manual. The system will detect environmental sounds when lullaby playback has ended.
Q. Is it possible to configure different camera units with different settings?
A. Different camera units may store different user-defined settings. The following functions are
available for user configuration:
• Camera Name
• Volume (At Intercom mode or lullaby playback)
• Lullaby
• Night Vision
• VOX Sensitivity
• Night Light
Follow the instructions in section 4.14 to configure the above functions with different camera units.
Q. Can I support multiple monitor units with one camera unit?
A. No. The monitor unit supports only four (4) different camera units simultaneously. For security
reasons, the camera unit can only register one monitor unit at a time.
Warning! Do not attempt to open the casing of the monitor unit and camera unit or the Lithium
battery. Improper use of the system may cause fatal damage and will void the warranty.
12