User Guide

8. Using a Phillips-head screwdriver, remove the two screws from the two brackets on the massager frame, then remove the brackets (Fig.4).
9. Locate Pin A, insert a flat-head screwdriver between the pin head and the bracket, then tap the screwdriver handle to dislodge the pin from
the bracket approximately 1/2 inch (Fig.4). NOTE: If the pin is stuck in the bracket, tap the pin with a hammer on the exposed area between
the two sides of the mounting bracket to loosen it (Fig.4).
10. Use your hand or a vice grip to remove Pin A completely from the bracket, allowing the calf massager to drop toward the floor.
11. Pull the calf massager away from Pin B to remove it from the chair. (Fig.5).
Pin B
Pin A
Brackets
(Fig.4)
(Fig.5)
2
If the pin is stuck in
the bracket, tap the
pin with a hammer
Pin